1. The LED Rope Light should be cut by sharp scissors.
2. DO NOT plug in power source when LED Rope Light is being installed.
3. DO NOT knock on or haul LED Rope light hardly while it is in using.
4. LED Rope Light must have the right voltage.
5. When connecting separate length , make sure the connectors are tightly connected each other.
6. Base cap must be pushed all the way onto the LED Rope Light.
7. If LED Rope Light is wrongly cut, damaged sections should be discarded.
8. When assembling the connectors the front ends must be bent leftwards then rightwards, the extra wires should be cut off diagonally with nippers to avoid short-circuit.
9. Use specified controller only;
10. To avoid fire and shock hazards, do not use when outer insulation is damaged.
Part 2.main technology data:
|
Project spec |
2 wire rope light |
Flat 3 wire rope light |
Flat 4 wire rope light |
Flat 5 wire rope light |
|
Voltage |
220V-240V |
220V-240V |
220V-240V |
220V-240V |
|
Frequency |
50-60Hz |
50-60Hz |
50-60Hz |
50-60Hz |
|
Power |
220V 2.2W/m |
220V 4.4w/m |
220V 6.6w/m |
220V8.8w/m |
|
Unit length |
1m.2m |
1m.2m |
1m.2m |
1m.2m |
|
Max use length |
300m |
150m |
100m |
50m |
|
Adapt temperature |
-30℃--45℃ |
-30℃--45℃ |
-30℃--45℃ |
-30℃--45℃ - |
Note: In order to guarantee your profit when using our products, please choose the qualified and experienced project company for installation to avoid from unnecessary losses and dissension.
NOTICE： please read the instruction before using product