1.Shell

1.1 Crowned steel shell with ti-rust oil ,carbon steel or 304stainless steel

1.2 Surface be treated with screw lathe,rubber lagging or plastic wheel

1.3Different Length of shell are available

 

2.Motor

2.1AC induction motor ,open-ended oil-impregnated.By Euro Standard IEC.

2.2By symmetrical winding,and the winging insulation class is F/H  

2.3Most common voltages available are 1*115--1*230V and 3*380—3*415V at 50 or 60 Hz(3-phase & 1-phase motors)

2.4Backstop (anti run-back) or electromagnetic brakes are NOT available

2.5with thermal protector

 

3.Gear box

3.1High strength plastic light-weight gearbox.

3.2 Plastic gear transmission.

3.3 Gears manufactured from a high quality finish ensuring low noise level and longevity

 

4.Sealing systerm

4.1Triple shaft sealing system—degree of protection IP66/67 (standard IEC norm)

4.2 Noise level is 52-60db measured at 1m distance in complete sound dead room

4.3Tested before shipment for the electrial and noise

 

5.Oil

 Pre lubricated with oil and non-maintenance

 

6.Cable outlet

6.1Straight connection

6.2 Elbow connection

6.3Cable length minimum 1.2 metres outside shaft

 

7.Package

Carton/wodden box

 

8. Temperature,

8.1Temperature arise max 15-30degree above environment temperature, under normal load condition

8.2To be used in the horizontal position only

More pls check our website or ctc me directly

Any special requirements pls let me know in advance