Mini wind&solar hybrid controller（200W-500W）
1. Introduction
This series of intelligent wind turbine controller, through the use of microcomputer chip,
This series of intelligent wind turbine controller, through the use of microcomputer chip,
achieve the protection,rectification,and control of wind turbine.
2. Working principle
The control system consists of batteries to provide electricity, at normal case, the
The control system consists of batteries to provide electricity, at normal case, the
electricity after circuit rectifier by the rectifier bridge, will get through the
controller of PCB for battery charging.
3. Features
Manual electric brake
When the wind speed is higher than the rated , you can press
the manual brake to stop the wind turbine from working, it can protect
the turbine from damaged.
PWM CV charging
Digital display
It will display the wind speed, rectified voltage, battery voltage, output current and yawing rounds.
Technical specifications:
|
Controller Model |
CO200 |
CO300 |
CO500 |
|
Rated Power |
200W |
300W |
500W |
|
Rated DC Voltage |
24V |
24V |
24V |
|
Over-discharge protection voltage |
21V |
21V |
21V |
|
Over-discharge recovery voltage |
23.5V |
23.5V |
23.5V |
|
Over-charged protection voltage |
30V |
30V |
30V |
|
Over-charged recovery voltage |
29V |
29V |
29V |
|
Regulative voltage |
28V |
28V |
28V |
|
Max. charge current |
10A |
14A |
23A |
|
Unload current |
≤25mA |
≤35mA |
≤50mA |
|
Cooling type |
Auto cooling & fan | ||
|
Protection |
Protection against over-charged, low-voltage and unloading | ||
We can assemble the complete set of wind/solar hybrid system according to your requirement,
with our wind turbine and solar panel.