600W Single Output Switching Power Supply SE-600 series
| Features: AC input active surge current limiting AC input range selected by switch Protections: Short circuit / Overload / Over voltage / Over temperature Forced air cooling by built-in DC fan High power density 4.9w/inch Built-in remote sense function Low cost | ||||||
| MODEL | SE-600-5 | SE-600-12 | SE-600-15 | SE-600-24 | SE-600-27 | SE-600-48 |
| DC VOLTAGE | 5V | 12V | 15V | 24V | 27V | 48V |
| RATED CURRENT | 100A | 50A | 40A | 25A | 22.2A | 12.5A |
| CURRENT RANGE | 0 ~ 100A | 0 ~ 50A | 0 ~ 40A | 0 ~ 25A | 0 ~ 22.2A | 0 ~ 12.5A |
| RATED POWER | 500W | 600W | 600W | 600W | 599.4W | 600W |
| RIPPLE & NOISE (max.) | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 200mVp-p |
| VOLTAGE ADJ. RANGE | 4.75 ~ 5.5V | 10 ~ 13.5V | 13.5 ~ 16.5V | 22 ~ 26.4V | 24 ~ 30V | 43 ~ 56V |
| VOLTAGE TOLERANCE | ±2.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| LOAD REGULATION | ±2.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| SETUP, RISE, HOLD TIME | 1000ms, 50ms, 20ms/230VAC, 1000ms, 50ms, 50ms/115VACat full load | |||||
| VOLTAGE RANGE | 90 ~ 130VAC / 180~260VAC selected by switch, 254~370VDC | |||||
| FREQUENCY RANGE | 47 ~ 63Hz | |||||
| EFFICIENCY (Typ.) | 78% | 83% | 84% | 87% | 87% | 88% |
| AC CURRENT | 12A / 115VAC, 7.5A / 230VAC | |||||
| INRUSH CURRENT (max.) | 25A / 230VAC, 50A / 230VAC | |||||
| LEAKAGE CURRENT | <2.0mA / 240VAC | |||||
| OVERLOAD | 110~135% rated output power | |||||
| Protection type : Shut down o/p voltage, re-power on to recover | ||||||
| OVER VOLTAGE | 5.75 ~ 6.3V | 13.8 ~ 16.2V | 18 ~ 21V | 27.6 ~ 32.4V | 31 ~ 36.5V | 57.6 ~ 67.2V |
| Protection type : Shut down o/p voltage, re-power on to recover. | ||||||
| OVER TEMPERATURE | 85oC± 5oC (TSW1) Detect on heatsink of power transistor | |||||
| Protection type : Shut down o/p voltage, recovers automatically after temperature goes down | ||||||
| WORKING TEMP.,HUMIDITY | -20 ~ +60oC, 20 ~ 90% RH | |||||
| STORAGE TEMP., HUMIDITY | -40 ~ +85oC, 10 ~ 95% RH | |||||
| TEMP. COEFFICIENT | ±0.05%/oC (0 ~ 50oC) | |||||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |||||
| SAFETY STANDARDS | Design refer to UL60950-1 | |||||
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC | |||||
| MTBF | 197khrs min. MIL-HDBK-217F (25oC) | |||||
| DIMENSION | 247*127*63.5mm (L*W*H) | |||||
| PACKING | 2.1Kg; 6pcs/13.4Kg/0.98CUFT | |||||