Din Rail Power Supply DR-30

 

Features: Universal AC input/Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Isolation class LED indicator for power on 100% full load burn-in test
MODEL	DR-30-5	DR-30-12	DR-30-15	DR-30-24
DC VOLTAGE	5V	12V	15V	24V
RATED CURRENT	3A	2A	2A	1.5A
CURRENT RANGE	0 ~ 3A	0 ~ 2A	0 ~2A	0 ~ 1.5A
RATED POWER	15W	24W	30W	36W
RIPPLE & NOISE (max.)	80mVp-p	120mVp-p	120mVp-p	150mVp-p
VOLTAGE ADJ. RANGE	4.75 ~ 5.5V	10.8 ~ 13.2V	13.5 ~ 16.5V	21.6 ~ 26.4V
VOLTAGE TOLERANCE	±2.0%	±1.0%	±1.0%	±1.0%
LINE REGULATION	±1.0%	±1.0%	±1.0%	±1.0%
LOAD REGULATION	±1.0%	±1.0%	±1.0%	±1.0%
SETUP, RISE TIME	100ms, 30ms/230VAC     100ms, 30ms/115VAC at full load
HOLD TIME(Typ.)	100ms/230VAC     30ms/115VAC at full load
VOLTAGE RANGE	85 ~ 264VAC       120 ~ 370VDC
FREQUENCY RANGE	47 ~ 63Hz
EFFICIENCY (Typ.)	74%	81%	82%	83%
AC CURRENT	0.88A/115VAC     0.48A/230VAC
INRUSH CURRENT(max.)	COLD START 15A/115VAC 30A/230VAC
OVERLOAD	105 ~ 160% rated output power
	Protection type : Constant current limiting,recovers automatically after fault condition is removed
OVER VOLTAGE	5.75 ~ 6.75V	13.8 ~ 16.2V	17.25 ~ 20.25V	27.6 ~ 32.4V
	Protection type : Shut down o/p voltage,re-power on to recover
WORKING TEMP.	-20 ~ +60oC
WORKING HUMIDITY	20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY	-20 ~ +85oC , 10 ~ 95% RH
TEMP. COEFFICIENT	±0.03%/oC (0 ~ 50oC)
VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS	Design refer to UL60950-1,TUV EN60950-1,EN50178
WITHSTAND VOLTAGE	I/P-O/P:3KVAC     I/P-FG:1.5KVAC     O/P-FG:0.5KVAC
ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT	Compliance to EN61000-3-2,-3
EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5; ENV50204, EN55024, Light industry level, criteria A
MTBF	441.5K hrs min. MIL-HDBK-217F (25oC)
DIMENSION	78*93*56mm (L*W*H)
PACKING	0.27Kg; 48pcs/14Kg/1.02CUFT