NO.	NAME	POWER	REV	PURPOSE
1	Electric molding machine	15Kw	1440r/min	molding
2	Molding retarder		39r/min	Molding
3	The most figure size	length	size	Height
		8500mm	2000mm	1700mm
4	The most ability of produce	12-21m/min
5	The weight of the machine	About 8T

Feature: Our C& Z section roll forming machine is different from other manufactures. Our machine adopt pre-cutting, which can be used for  a longer time  than after-cutting. For after-cutting, when the cutter was used for  settled times it will be out of use and you need new mould.

Its troublesome to change the new mould and its expensive. Our machine cuts before the C& Z shape is formed, so that the cutting part can be much saved. Our machine can cut about 500,000 times, whereas the machine from other manufacturers can only cut 20,000 times at most. This pre-cutting technique was invented by our big boss, and in China only we master this technique.

Usage: The C-shaped and Z-shaped purlines formed by this machine have excellent anti-bending property and are easy to install. They are widely used as the supporter of roof and wall in large-scale and mid-scale construction, such as factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, garden and so on.

Different dimensions are available according to your specific requirements.