Product Main

Specifications

To:
 
（This is only a reference for your choices）
 
Table of contents
 
 
1.  Introduction
2.  Customer requirements
     3.  Prices quotation.
     4.  Delivery Time
 
 
 
 
 
 
                      JINAN SANHOO INC.，LTD
                             2009/10/26
      
 
 
 
 
1. Introduction
 
JINAN SANHOOS INC., LTD, a producer of PVC win-door, aluminum win-door, insulating glass processing machine.
 
Take this opportunity; we would like to introduce our company as the professional manufacture of PVC and aluminum equipment in China. We have a wide range of machine, such as Welding Machine, Cutting machine, Milling Machine, Cleaning Machine etc. for PVC and ALU windows and doors. We can not say our products are the best, but we believe our products have the highest cost effectiveness.
 
"Profession,factualism,enterprising,innovation” is the enterprise culture in the company, strengthened quality certification system makes our products in the leading position in the industry.
 
Sincerely yours
 
                      JINAN SANHOOS INC.，LTD
 
 
 
 
 
2. Customer requirements
 
Vertical Insulating Glass Production Line (Plate Press)
GPL-XY1600/1800/2200/2500
 
LOW-E Insulating Glass Production Line.
Automatic control functions for LOW-E Glass (three pairs of brush treatment for LOW-E).
PLC and monitor system -Temperature, speed, production volume mechanical trouble check Whole line control function with 1monitor.
Specially designed for step insulating glass & three-layer insulating glass.
Full distance automatic changeable frequency speed adjustment, which can save work waiting time and improve production efficiency.
 
Technical Parameter:
 
Model                  GPL-XY2500
Input voltage          380V  50Hz
Input power               26.5 Kw
Max. glass size          2500×3300mm 
Min. glass size          400×280mm
Glass thickness             3~18mm
Working speed             8~48m/min
Overall dimension    22500×2860×3380mm
 
 
Horizontal Insulating Glass Production Line    BWX-1500/1800
 
 
 
The machine is equipment for produce insulating glass with flexible spacer and aluminum spacer. It mainly includes: glass cleaner, application table, spacer assembly table, heated roller press etc. Stepless speed regulation adopted results convenient in speed adjustment.
 
Technical Parameter
Model                     BWX-1500        
Input voltage                380V  50Hz                 
Input power                   28.5Kw                   
Max. glass size            2000×1500mm                
Min. glass size             400×400mm                  
Glass thickness                3~8mm                      
Working speed                0~4m/min                    
Overall dimension      10500×1950×1100mm             
 
LQJ02 aluminum spacer cutting machine
 
 
LQJ02 aluminum spacer cutting machine is the specialized equipment in cutting aluminum spacing strips. Put the aluminum spacing strips on the working table and move the locating piece to the desired length (within 2400mm). When the cylinder is compressed, the saw can finish the cutting process automatically. This type of machine is adapted to cutting of aluminum spacing strips with 6~18mm W×6mm H in size.

Main technical parameters：
Power (Voltage / Frequency) 380V 50HZ
Total Power 0.25KW（2850r/min）
Saw Blade Speed 3880r/min
Diameter×thickness ×quantity of saw teeth 150/1.2/170
Max. Cutting width 90mm
Dimension 5000×1050×415mm
 
Automatic insulating glass production line LBZ2000PC
 
 
 
Detailed Product Description
 
The LBZ2000PC is specially designed for aluminum-spacer type insulating glass. This production line includes: The vertical conveyer, washing and dry station, inspecting station, aluminum frame assembly station, glass storage station, press Robot, output conveyer, and tilting table. The line can be used to complete the glass cleaning and drying, the aluminum frame position automatically fits and presses the glass plate, tilt the glass into the level position and move out. This production line has highly effective, the low consumption, small space, ease of operation and so on.
 
 
This machine has a high automatic degree, each electrical machinery convey adopt frequency conversion governor, each components and parts movement degree have touch-sensitive screen interface design which is more humanization and was controlled by photoelectric switch and whole PLC, it’s easy and simple to operate and having automatic energy-conserving disconnected types of working systems.
 
 
 
Main technical features:
 
 
1．The equipment is automatically controlled by PLC for the whole operation
 
 
2． Function: can produce IGU, Stepped IGU, Triple IGU and shaped IGU.
 
 
3．Identify the coating on glass, suitable for washing different kind of glass.
 
 
4．The whole equipment is bendable and the structure can be taken apart, which is easy for transportation.
 
5．The silencer door design in the washing and drying station is used to lower the noise of drying station.
 
 
6． The lateral and below positioning of aluminum frame adopts manual adjustable sealant depth type. The positioning of aluminum frame adopts compressed spring and rubber block buffer type structure, it can be adjusted according to the thickness of the glass.
 
 
 
7．The pressing robot adopts adjustable structure which makes the pressing of two pieces of glass more even. The lifting beam uses cylinder and servo Electric handspike, when the machine making normal insulating glass, the cylinder works, when the machine making stepped unit, both the cylinder and Electric handspike work. Even if the servo motor doesn’t work, the machine can still makes normal insulating glass.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Parameter data：
Power supply
Voltage（V）
380
Frequency（Hz）
50
Total power
kW
25
Washing speed
m/min
2~10
Max. working speed
m/min
45
Min. insulating glass size
mm
450×350
Max. insulating glass size
mm
2500×2000
Washing glass thickness
mm
3~12
Max. insulating glass thickness
mm
40
The height of support roller
mm
520
Weight
kg
≈5600
Dimension
L×W×H（mm）
16400×2500×3087
Stepped IGU
L×W（mm）
150×50
 
 
 
 
 
Vertical Insulating Glass Production Line of LBZ2600P
Vertical Insulating Glass Production Line of LBZ2600P
Vertical insulating glass production line for the manufacture of dual-sealed insulating glass units with automatic operations. Specifications as follows:
 
Technical data of the production line
 
Processable dimensions (h x l):                          min.   190 x 350 mm
 
               :                                                         max.  2600 x 3500 mm
Please observe the notes at the indicated positions, too.
Thickness of insulating glass unit:           12 up to 60 mm
 
Glass thickness:                           3 up to 15 mm
 
Laminated glass:                       preferably rectangular sawn or ground,
                                         no protruding foils
Electrical connection:                      380 V, 3-phases+N+PE, 50 Hz and
                                                       220 V, 1-phase, 50 Hz
Voltage fluctuations:                       + 6 % to - 10 %
 
Control voltage:                                 24 V – DC
 
Electronic control system:                      Siemens PLC
 
Ambient temperature:                                min. 15°C, max. 35°C, following      DIN 40040
Relative air humidity:                          max. 75 % rel. following DIN 40040
 
Vertical transport height:                      500 ± 20 mm
 
Inclination of vertical support wall:          6 degrees
 
Compressed Air supply:                      6.5 bar
 
Water supply:                                   min. 4.5 bar
 
The production line is suitable for the manufacture of: Double insulating glass units, rectangular, stepped and Low_E   
                          
Distance from glass edge to spacer outside:          adjustable from 2 to 20 mm
Transport speed:                                                              v = 48 m/min
Paint:                                                                               Deca Design
Working direction:                                                            left - right
 
Labeling:                                                                          Chinese
 
 BLY1500A Cold Roller Press Machine
 
Features：
1 The lift adopts the unilateral regulation with steady operation.
2 This machine adopts gradient pressing which makes the pressing effect much better.
3 The main steel structure weldment adopts advanced vibrating and natural stress release (for the key parts), which release the stress on the material itself and the weldment part. These can ensure the long-term mechanical precision.
 
Technique parameter
Voltage                                 380V  50HZ         
Total power                              0.37kw       
Work speed                           0~5.0m/min  
Insulating glass thickness                ≤40mm 
Min. glass size                     350×350mm
Max. glass size                    1500×2000mm
Dimension                           1930×1850×1300mm
 
 
BRY1500 Hot roller press machine
Features：
1 The lift adopts the unilateral regulation with steady operation.
2 This  is a special equipment of producing insulating glass with composite plastic strips
3 Energy efficient design, automatic control of temperature, is economic-type equipment
Technique parameter：
Voltage                              380V  50HZ        
Total power                         18.37kw      
Work speed                        0~5.0m/min   
Insulating glass thickness           ≤40mm
Min. glass size                 350×350mm
Max. glass size                1500×2000mm 
Dimension                      2750×1850×1350mm
BXGW1600 Glass Rinsing and Drying Machine
Features：
1 The rinsing sector and the water flow system all adopt the stainless steel and rotproof material which is durable.
2 The drying zone adopts sponge roller to absorb water and hot wind drying technology to achieve good drying effect.
3  The washing machines using the transmission system stepless speed regulation, and the high efficiency washing machine applications
 
Technique parameter：
Voltage                           380V  50HZ   
Total power                          8.43kw
Work speed                       1.2~5.0m/min
Min. glass size                 400×400mm
Max. glass size                 1600×2000mm
Max. Insulating glass thickness                      12mm
Quick work speed                  25m/min
Demension                       2600×2100×1200mm
 
DQG01 CNC glass cutting machine
Detailed Product Description
DQG01 CNC glass cutting machine is of high precision, high speed, low noise, which is used for cutting straight-line and random shape of flat glass. The CAD/CAM software makes the shape easily and fast and efficiency, because of its powerful shape compiling tools and route optimization program. The high-grade servomotors and high-precision transmission modules are adopted to update the quality of shaped glass. Benefit of its high reliability and effective, DQG01 is the powerful cutting tools for batch production
Main part information:
Software: Optima （Italy brand）        Mitsubishi(Japanese brand)
Servo motor(model name: HC-SFS352/152;HC-MFS43): Servo driver(model name: MR-J2S-350A/200A/40A): Mitsubishi
Computer: Lenovo       LCD: Lenovo
some small electrial part: ABB
Max. glass size:3660×2440(mm)      Glass thickness: 3-19(mm)
Processing speed: 60-120m/min      Processing recision: ±0.3
Power: 11.3kw                       Weight: 2000kg.  Overall  dimension: 4500×3200×1150(mm)(X×Y×Z)
DLT-NC/CNC-3725 series full-automatic glass cutting lines
Features:
 The machine is programmed, precision electro-optical probe, imported PLC control, walking through the guide to achieve the original glass from the vacuum suction removed from the bracket on and automatically transmitted to the cutting table, equipment, vacuum, hydraulic and electrical system is mainly configured using imported components, excellent performance, action, stable and reliable, convenient and safe.

 Technical parameters:
 Model              NC/CNC3725        NC/CNC6740    NC/CNC8046

 Glass of the original film size 3660 × 2440    6100 × 3300      7600 × 3660

 Cutting precision     ≦ ± 0.2mm/2m   ≦ ± 0.3mm/2m  ≦ ± 0.3mm/2m

 Cutting thickness       3-25mm            3-25mm           3-25mm

 Cutting speed       0-120mm/min         0-120mm/min      0-120mm/min

 Power              9KW                13KW            13KW

 Weight              2800KG             4200KG           4500KG

 Dimension  600 × 3300 × 860mm  7200 × 4000 × 860mm 8600 × 4500 × 860mm
Double-Mitre Cutting Saw
Product specification：LJZ2F-CNC-550×5000
Product Information：
Equipment Features:
☆   The machine adopts Europe model with neat appearance and good style.
☆   The imported electromotor with the attached blade, the Cutting Angle can be auto-adjusted.
☆   The feeding of the blade is driven by airdraulic damping cylinder, with smooth cutting.
☆   The imported blade with high precision makes the cutting surface smooth.
☆   Several profile processing dimensions can be input one time and make continuous cutting.
☆   The processing dimension can be directly input; the cutting length can be changed without returning the reference point.
☆   The imported service motor with the high moving speed and high precision should drive the sawing head.
☆   The airproof device under the worktable has wonderful crumbs-clearing effect.
☆   The following saw cover keeps it working in the clean environment   
☆   The moving and feeding of the head adopts the imported linear bearing motion to guarantee the precision.
☆   The stuff follow-up supporter can reduce the machine space.
☆     The profile was clamped by three cylinders in every head, and kept the cutting security
Main specification and technical parameter
Power Supply  :380v   50Hz
Cutting motor power   :1.85-2.22kw
Cutting motor Rotational Speed :2830-3400r/min
Operation Air Pressure     :0.6～0.8MPa   
Air consumption  :60L/min
Blade Specification   : ?500mm×?30×4.4  Z=120 （Standard size）
:?500mm×?30×4.4  Z=132 （For spare）
Cutting Speed     : stepless speed regulation 0～3 min
Cutting length   : Max 5000 mm； Min 450 mm
Cutting Width    :150 mm  （?500mm blade）   175mm（?550mm blade）
Cutting Height   :Max 210 mm( 90°) 
Cutting angle  :45°,  90°,  22.5°
Repeat locating length tolerance  : ±0.2mm 
Cutting Profile Surface Plan :≤0.10mm
Cutting Angle tolerance :±5′
Cutting Profile Surface Roughness  :Ra12.5um
ContourDimension :6352mm×1450mm×1650mm   
Weight :about 2500kg  
FGJ01 Molecular Sieve Machine
Features：
1 The heating device can ensure the absorption rate of the filled desiccants.
2 The vibrating system contribute to the filling of desiccants.
3 The surplus material recycling system reduces the cost by saving desiccants.
4 The main spare parts of electric and pneumatic sectors adopt the famous brands home and abroad or the supplier with internationally recognized quality certification.
 
Technique parameter：
1,          Power：220V/50Hz
2,          Total power：1Kw
3,          Air pressure range：0.5-0.8Mpa
4,          Withstand voltage ：1.2Mpa
5,          vibration frequency：0-15Hz
6,          ambient temperature：5-60℃
7,          Outside dimension：2600×400×2210mm
8,          Weight：120kg
FGJ02 molecular sieve filling machine
 
FZJ01 Molecular Sieve Filling Machine
Features：
1 FZJ01 specializes in aluminum bar bending under control of PLC system, which fills in enclosed condition. It is equipped with dust filtration device which solves the problem that desiccant absorbs mist and becomes not effective.
2 The main spare parts of electric and pneumatic sectors adopt the famous brands home and abroad or the supplier with internationally recognized quality certification.
3 The main steel structure weldment adopt the advanced vibrating stress release and natural release (key parts), which can release the stress at the most on the material itself and the welding point and maintain the long-term mechanical precision.
Technique parameter：
1. Electric power: AC220V 50HZ    2. Air pressure: 0.5——0.6Mpa
3. Aluminum bar specification: 5.5——20mm
4. Molecular sieve diameter: ≤0.5mm
5. Aluminum frame dimension: Min300×300mm Max2000×2000mm
6. Filling speed: 5——8s/个（1000×1000mm 9A）
7. Contour dimension: 900×900×3000mm    
8. Weight: 80KG
Glass Straight-line Bevelling machine DB251D
 
Glass Straight-line Bevelling machine DB251D
 
The "DB251D” Glass Straight-line Bevelling machine models have been designed and built to accurately grind and polish a bevel to the face of flat glass sheets and also smooth grind ('pencil edge’) the remaining glass sheet edge. The bevelling, polishing and edging functions are all be processed at one time. The five grinding and smoothing spindles are accurately adjusted as a group allowing fast and accurate changes in required bevel width. The two felt polishing wheels are positioned by manual. The edging diamond wheel is adjusted manually. The whole machine’s bed is adjusted electrically for angle changes, via a robust gear drive system.
 
The "DB251D” Digital display control allows the operator to adjust the bevel angle, bevelling wheel positions, glass thickness and conveyor speed through individual control switches and numerical display readouts.The characteristics of the machine’s design and build quality result in a machine with very high rigidity, low levels of vibration , low energy consumption and simple operation.
Each spindle has an associated Ammeter enabling the operator to precisely regulate the degree of contact with the glass. Electrical plant Electric installation is carried out according to CE rules. The on-board control panel is housed above the conveyor. All motors are supplied according to the client’s request, transformers are not usedWater SystemA closed circuit recirculation system is included consisting of one stainless steel tank for water and one stainless steel tank for the cerium oxide polishing solution. Water distributing/return circuits and powerful recycle pumps are supplied
 
 
.
Technical data:
1    Min. process size:120mm*120mm  
2    Max Arris Angle: 3°-30.  
3   Max bevel width:30mm 
4   Glass process thickness: 4mm-19mm
5   Process speed: 0.73-3.65m/min
6   Spindles: 8  
7   Power：16.8kw
8   Overall dimension: 7700*1300*2520(mm)
9   Weight: 4050kgs
 
 
 
 
 
Insulating glass manually
press and cover machine YHJ01
 
 
It is used to press covered insulating glass, it is driven by pneumatic, and the pressure can be adjusted, pressure symmetrical, easy operation
 
 
JT01 Butyl Extruder Machine
 
Features：
 
1 This equipment has past the test of Jinan Municipal Supervision and Examination Station of Product Quality. It is well qualified and up to the related standards.(see attached <Inspection Report>)
2 The main steel structure weldment adopt the advanced vibrating stress release and natural release (key parts), which can release the stress at the most on the material itself and the welding point and maintain the long-term mechanical precision.
3The main spare parts of electric and pneumatic sectors adopt the famous brands home and abroad or the supplier with internationally recognized quality certification.
4 This machine is under control of PLC system which helps to finish extruding and sealing with high accuracy and high efficiency. It is applicable to square, rectangle, circle and other shapes of aluminum spacing frames with different sizes.
5 The machine is heat-resistant and fully enclosed which solve the problem of butyl leakage. The automatic heating time is adjustable.            
6 This machine is equipped with hydraulic system which feeds the sealant.
7 The conveying belt will automatically batch type convey??? If the temperature is over 80 degree centigrade. 
8 Straight and curved aluminum frames sealing functions could be switched freely to each other. The nozzle head and the butyl cylinder can be automatically heated.
9 The diameter of butyl cylinder is 195MM.
 
Technique parameter：
 
Voltage                              380V  50HZ        
Total power                          3.2kw (2.09kw)   
Adjustable range                   6~20mm
Transmit speed                       15m/min    
Squeeze pressure                     15~18Mpa   
Spirit source pressure                0.5~0.8Mpa   
Extruding temperature              110-160℃  
Dimension                          3500×700×1300mm
 
 
JT02H Butyl Extruder Machine
Features：
1 Touch screen, Human-Machine Interface, PLC control system.
2 It shows when the butyl runs out.
3 It adopts German pneumatic-hydraulic pressure technology
4 The conveying belt speed is adjustable.
5 It can seal curved aluminum spacers.
6 The butyl extruding on and off is under digital control.
7 It adopts butyl cylinder and nozzle double heating devices.
8 The distance between nozzles is adjustable.
Technique parameter：
1.  Electric power: 2KW  AC220V  50HZ
2.  Air pressure: 0.8Mpa
3.  Hydraulic pressure: 0-20Mpa
4.  Heating temperature: 100——160℃
5.  Heating time: 30——40min
6.  Butyl mouth distance: 0——27mm
7.  Contour dimension: 3000×450×650mm
 
 
 
JT03H Automatic Butyl Coating Machine
 Features:
 1.PLC Control System
 
 2. Digital control out of glue and glue to stop time

 3. No glue automatically display

 4. Hydraulic conversion using the German gas-liquid two-way charging technology

 5. Coating speed adjustable 0 - 27m/min

 6. Can be coated curved aluminum frame

 7. Automatically adjust the width of the mouth glue
 Technical parameters:
 1. Heating temperature: 100 ℃ - 160 ℃

 2. Butyl rubber heating time: 30 - 40min

 3. Coating width: 0 - 27mm      4. Power: 1P + N 220V 50Hz 2kw

 5. Pressure :0.6-0 .8 Mpa Hydraulic: 0-20Mpa

 6.Size: 3000mm × 620mm × 1025 mm
 
Laminated glass production line WD2500
 
Detailed Product Description
 
Item
Unit
parameters
Remarks
Working glass dimension
mm
2500×4000
Combinating glass not more than 4 layers
Maximum working glass dimension
mm
2500×5000
Combinating glass not more than 2 layers semi-automatical control (dimension can be changed according to the requests of customer)
Minimum working glass length
mm
420
 
Minimum width of working glass
mm
300
 
Working glass thickness
mm
4-40
Thickness can be changed according to the request of the customer
Current drain
kWh
3.6-4.5/m2
3mm glass + 0.38PVB + 3mm glass
Length of the production line
mm
60000
 
Frequency
Hz
50
As the request of customer
Voltage
V
380
As the request of customer
Voltage of machine
V
127
As the request of customer
Total output
kW
 400
 
Note: direction of production line: facing the production line, conveying direction from left to right.
 
 
 
 
 
 
 
 
 
 
 
 
 
LB1600G Semi-automatic Insulating Glass Production Line
Features：
1 The main steel structure weldments adopts advanced vibration stress relief and natural stress relief which release the interior stress of the material and the welding point at the most, which ensures the long-term mechanical precision.
2 The glass conveying, positioning and tilting is under semi-automatic control.
3 Thermostat water tank can be custom made.
4 The speed is regulated by frequency conversion, which ensures the stable conveying.
5 It is equipped with time-lapse roller pressing system, the precision of which is high.
6 The aluminum spacer positioning system is easy to operate
Technique parameter：
Voltage: 380V/50HZ   Total power: 20.39KW  Work speed: 2-7.0m/min
Min. glass size:  420mm×200mm    Max. glass size: 2000mm×1600mm
the washing glass thickness             3-12mm
Insulating glass thickness:               ≤40mm
Max work speed:                       22m/min
Dimension :                            1800×2100×2630mm
Total weight:                            3200kg
 
    LBXH1950PⅦ Vertical Automatic 
Insulating Glass Production Line
 
Features：
 
1. This production line is under PLC control. The Rinsing Station, Assembly Station and Pressing Robot adopts digital input control system, which contributes to the easy and humane automatic operation.
2. This production line adopts touch screen with human-machine interface, and it is free and easy to switch between manual and automatic modes. It has the oneoperation display function and shows accurately the equipments’ working condition and possible malfunction, which bring much convenience to servicing and maintenance.
3 It can automatically identify the film layer of both the coated glass from low-e glass.
4 The main structure of Rinsing Station is of bending and welding fabrication of industrial stainless steel plates.
5 The Rinsing Station adopts intermittent operation energy-conservation mode which can rinse coated and LOW-E glass. The brushes automatically segregate during rinsing coated or Low-E glass. It can alarm automatically and stop conveying if the film layer is not in conformity with the settings.
6 The rinsing sector adopts oil-free water-resistant bearings which eliminates the possibility of the oil molecular floating in air during the glass past the high pressure wind drying zone and avoids water-borne stains.
7 The spraying system with original design can adjust the spraying angle freely. It is easy and convenient to maintain and servicing. The water tank of Rinsing Station is equipped with water-heat system which is recommended to be put in use under 7oC.
8 The blower draws air from outside and the air circulates inside which ensure the cleanness of air. It is optimally designed to retain high wind pressure with low power of 11KW. The air volume and pressure makes sure of the total dryness of glass. It has wind-heating system which is recommended to put in use under 7oC.
9  Water spraying and drying zone adopts roller conveying system which avoids the scratches and crushing stains on surface of coated or LOW-E glass, which precludes the breaking-off of the film layer.
10 Conveying lagging board is polycarbonate-coated on both sides of high intensity, which is rot-resistant and even.
11 Back support wheels is made of polycarbonate with nylon core which doesn’t fray or scratch when proceeding with high speed or at a sudden stop on the glass surface. The outer circle of the back support wheels can be replaced when it is frayed.
12 The bottom roll wheel is made of polyurethane whose cores adopts threaded connection which could make sure of no disengagement. If one side of bottom roll wheel frays, it could be reversed and work again.
13 Pressing robot has central positioning system which can press the glass evenly and equally in the middle part of Pressing station. Hence the press quality will be secured without being affected by the size of the glass. And its working life is thus twice as long as the ordinary one. The pressing time is adjustable according to the size of glass.
14 The key conveying parts are connected by expansion joint instead of key connection, which ensure the adjustment precision and conveying reliability.
15 All the wires adopt aviation plug connection which has good anti-interference performance and is convenient for the installation and maintenance of the equipments.
 
Technique parameter：
 
 
1. Max glass dimension: 1950×2580mm
2. Min glass dimension: 450×200mm
3  Rinsing glass thickness: 3——15mm
4. Max insulating glass thickness:48mm
5. Rinsing speed: 0——8m/min
6. Brush:3 pairs
7. Transfer speed: Max45m/min
8. Compress air： flow rate0.8m3/min  
9. Air pressure：1Mpa
10.Electric power: 25.3KW 3P 380V/ 50HZ
11.Water： water electric conductivity≤50us/cm
12.Water consumption: 0.5t/h
 
 
LBXH1950PⅧ Vertical Automatic 
InsulatingGlass Production Line
Features：
 
1. This production line is under PLC control. The Rinsing Station, Assembly Station and Pressing Robot adopts digital input control system, which contributes to the easy and humane automatic operation.
2. This production line adopts touch screen with human-machine interface, and it is free and easy to switch between manual and automatic modes. It has the oneoperation display function and shows accurately the equipments’ working condition and possible malfunction, which bring much convenience to servicing and maintenance.
3 It can automatically identify the film layer of both the coated glass from low-e glass.
4 The main structure of Rinsing Station is of bending and welding fabrication of industrial stainless steel plates.
5 The Rinsing Station adopts intermittent operation energy-conservation mode which can rinse coated and LOW-E glass. The brushes automatically segregate during rinsing coated or Low-E glass. It can alarm automatically and stop conveying if the film layer is not in conformity with the settings.
6 The rinsing sector adopts oil-free water-resistant bearings which eliminates the possibility of the oil molecular floating in air during the glass past the high pressure wind drying zone and avoids water-borne stains.
7 The spraying system with original design can adjust the spraying angle freely. It is easy and convenient to maintain and servicing. The water tank of Rinsing Station is equipped with water-heat system which is recommended to be put in use under 7oC.
8 The blower draws air from outside and the air circulates inside which ensure the cleanness of air. It is optimally designed to retain high wind pressure with low power of 11KW. The air volume and pressure makes sure of the total dryness of glass. It has wind-heating system which is recommended to put in use under 7oC.
9 Water spraying and drying zone adopts roller conveying system which avoids the scratches and crushing stains on surface of coated or LOW-E glass, which precludes the breaking-off of the film layer.
10 Conveying lagging board is polycarbonate-coated on both sides of high intensity, which is rot-resistant and even.
11 Back support wheels is made of polycarbonate with nylon core which doesn’t fray or scratch when proceeding with high speed or at a sudden stop on the glass surface. The outer circle of the back support wheels can be replaced when it is frayed.
12 The bottom roll wheel is made of polyurethane whose cores adopts threaded connection which could make sure of no disengagement. If one side of bottom roll wheel frays, it could be reversed and work again.
13 Pressing robot has central positioning system which can press the glass evenly and equally in the middle part of Pressing station. Hence the press quality will be secured without being affected by the size of the glass. And its working life is thus twice as long as the ordinary one. The pressing time is adjustable according to the size of glass
14 The key conveying parts are connected by expansion joint instead of key connection, which ensure the adjustment precision and conveying reliability.
15 All the wires adopt aviation plug connection which has good anti-interference performance and is convenient for the installation and maintenance of the equipments.
 
Technique parameter：
 
1.Max glass dimension: 1950×2580mm
2.Min glass dimension: 450×200mm
3 Rinsing glass thickness: 3——15mm
4.Max insulating glass thickness:48mm
5.Rinsing speed: 0——8m/min
6.Brush:3 pairs
7.Transfer speed: Max45m/min
8.Compress air： flow rate0.8m3/min   air pressure：1Mpa
9 Electric power: 25.9KW 3P 380V/ 50HZ
10.Water： water electric conductivity≤50us/cm
11.Water consumption: 0.5t/h
12.Outside dimension: 21900×3100×2900mm
 
 
 
LBXH 2500P(Ⅶ) Vertical Automatic 
Insulating Glass Production Line
Features：
1. This production line is under PLC control. The Rinsing Station, Assembly Station and Pressing Robot adopts digital input control system, which contributes to the easy and humane automatic operation.
2. This production line adopts touch screen with human-machine interface, and it is free and easy to switch between manual and automatic modes. It has the oneoperation display function and shows accurately the equipments’ working condition and possible malfunction, which bring much convenience to servicing and maintenance
3 It can automatically identify the film layer of both the coated glass from low-e glass.
4 The main structure of Rinsing Station is of bending and welding fabrication of industrial stainless steel plates.
5 The Rinsing Station adopts intermittent operation energy-conservation mode which can rinse coated and LOW-E glass. The brushes automatically segregate during rinsing coated or Low-E glass. It can alarm automatically and stop conveying if the film layer is not in conformity with the settings.
6 The rinsing sector adopts oil-free water-resistant bearings which eliminates the possibility of the oil molecular floating in air during the glass past the high pressure wind drying zone and avoids water-borne stains
7 The spraying system with original design can adjust the spraying angle freely. It is easy and convenient to maintain and servicing. The water tank of Rinsing Station is equipped with water-heat system which is recommended to be put in use under 7℃
8 The blower draws air from outside and the air circulates inside which ensure the cleanness of air. It is optimally designed to retain high wind pressure with low power of 11KW. The air volume and pressure makes sure of the total dryness of glass. It has wind-heating system which is recommended to put in use under 7℃.
9 Water spraying and drying zone adopts roller conveying system which avoids the scratches and crushing stains on surface of coated or LOW-E glass, which precludes the breaking-off of the film layer.
10 Conveying lagging board is polycarbonate-coated on both sides of high intensity, which is rot-resistant and even.
11 Back support wheels is made of polycarbonate with nylon core which doesn’t fray or scratch when proceeding with high speed or at a sudden stop on the glass surface. The outer circle of the back support wheels can be replaced when it is frayed.
12 The bottom roll wheel is made of polyurethane whose cores adopts threaded connection which could make sure of no disengagement. If one side of bottom roll wheel frays, it could be reversed and work again.
13 Pressing robot has central positioning system which can press the glass evenly and equally in the middle part of Pressing station. Hence the press quality will be secured without being affected by the size of the glass. And its working life is thus twice as long as the ordinary one. The pressing time is adjustable according to the size of glass
14 The key conveying parts are connected by expansion joint instead of key connection, which ensure the adjustment precision and conveying reliability.
15 All the wires adopt aviation plug connection which has good anti-interference performance and is convenient for the installation and maintenance of the equipments.
 
Technique parameter：
 
 
1.    Max glass dimension：2450×3150mm
2.     Min glass dimension：450×200mm
3.     Rinsing glass dimension：3——15mm
4.     Max insulating glass thickness：48mm
5.     Rinsing speed：0——8m/min
6.     Brush：3pairs
7.     Transfer speed：Max45m/min
8.     Compress air：flow rate0.8m3/min   
9.     Air pressure：1Mpa
10.     Electric power ：37.5KW  3P 380V/ 50HZ
11.    Water：water electric conductivity≤50us/cm    
12.    Water quantity 0.5t/h
13.   Contour size：22650×2100×3350mm
 
 
LBXH 2500P(Ⅷ) Vertical Automatic Insulating Glass Production Line
Features：
1. This production line is under PLC control. The Rinsing Station, Assembly Station and Pressing Robot adopts digital input control system, which contributes to the easy and humane automatic operation.
2. This production line adopts touch screen with human-machine interface, and it is free and easy to switch between manual and automatic modes. It has the oneoperation display function and shows accurately the equipments’ working condition and possible malfunction, which bring much convenience to servicing and maintenance.
3 It can automatically identify the film layer of both the coated glass from low-e glass.
4 The main structure of Rinsing Station is of bending and welding fabrication of industrial stainless steel plates.
5 The Rinsing Station adopts intermittent operation energy-conservation mode which can rinse coated and LOW-E glass. The brushes automatically segregate during rinsing coated or Low-E glass. It can alarm automatically and stop conveying if the film layer is not in conformity with the settings.
6 The rinsing sector adopts oil-free water-resistant bearings which eliminates the possibility of the oil molecular floating in air during the glass past the high pressure wind drying zone and avoids water-borne stains.
7 The spraying system with original design can adjust the spraying angle freely. It is easy and convenient to maintain and servicing. The water tank of Rinsing Station is equipped with water-heat system which is recommended to be put in use under 7oC.
8 The blower draws air from outside and the air circulates inside which ensure the cleanness of air. It is optimally designed to retain high wind pressure with low power of 11KW. The air volume and pressure makes sure of the total dryness of glass. It has wind-heating system which is recommended to put in use under 7oC.
9 Water spraying and drying zone adopts roller conveying system which avoids the scratches and crushing stains on surface of coated or LOW-E glass, which precludes the breaking-off of the film layer.
10 Conveying lagging board is polycarbonate-coated on both sides of high intensity, which is rot-resistant and even.
11 Back support wheels is made of polycarbonate with nylon core which doesn’t fray or scratch when proceeding with high speed or at a sudden stop on the glass surface. The outer circle of the back support wheels can be replaced when it is frayed.
12 The bottom roll wheel is made of polyurethane whose cores adopts threaded connection which could make sure of no disengagement. If one side of bottom roll wheel frays, it could be reversed and work again.
13 Pressing robot has central positioning system which can press the glass evenly and equally in the middle part of Pressing station. Hence the press quality will be secured without being affected by the size of the glass. And its working life is thus twice as long as the ordinary one. The pressing time is adjustable according to the size of glass.
14 The key conveying parts are connected by expansion joint instead of key connection, which ensure the adjustment precision and conveying reliability.
15 All the wires adopt aviation plug connection which has good anti-interference performance and is convenient for the installation and maintenance of the equipments.
 
Technique parameter：
Technique parameter
1.      Max glass dimension：2450×3150mm
2.      Min glass dimension：450×200mm
3.      Rinsing glass thickness：3——15mm
4.      Max insulating glass thickness：48mm
5.      Rinsing speed：0——8m/min
6.      Brush： 3 pairs
7.      Transfer speed：Max45m/min
8.      Compress air：flow rate0.8m3/min  
9.      Air pressure：1Mpa
10.      Electric power：38KW  3P 380V/ 50HZ
11.     Water：water electric conductivity≤50us/cm
12.     Water consumption 0.5t
 
 
 
LBZ1600P Vertical Automatic 
InsulatingGlass Production Line
Features：
 
1 The main steel structure weldments adopts advanced vibration stress relief and natural stress relief which release the interior stress of the material and the welding point at the most, which ensures the long-term mechanical precision.
2 Rinsing and drying station with air cushion is in favor of rinsing 3-12mm thick glass.
3 Washing brushes consists of nylon and a stainless axle. The hair is imported and heat-resistant in favorable of the cleanness and surface protection for glass. The electric motor for brushes is controlled alone.
4 The machine adopts omni-range auto frequency conversion speed regulation. PLC control system saves waiting time and enhances the production efficiency.
5 This machine can keep washing continuously and discriminate the first and the second piece of glass with no waiting time.
6 It can process triple insulating glass units with high efficiency.
 
 
 Technique parameter：
 
1.      Electric power: 13.5KW 3P 380V 50HZ
2.      Max glass dimension: 2000×1600mm
3.      Min glass dimension: 500×350mm
4.      Rinsing speed: 2——7m/min
5.      Transfer speed: 22m/min
6.      Max insulating glass thickness:40mm
7.      Compress air： flow rate0.8m3/min  
8.    Air pressure：0.8Mpa
9.      Water： water electric conductivity≤50us/cm
10.     Outside dimension: 13200×2100×2630 mm
 
 
 
LBZ1800P Vertical Automatic 
Insulating Glass Production Line
Features：
 
1 The main steel structure weldments adopts advanced vibration stress relief and natural stress relief which release the interior stress of the material and the welding point at the most, which ensures the long-term mechanical precision.
2 The rinsing sector and water flow system all adopts stainless steel and rot-proof material and equipped with air-heating device.
3 Rinsing and drying station with air cushion is in favor of rinsing 3-12mm thick glass.
4 Washing brushes consists of nylon and a stainless axle. The hair is imported and heat-resistant in favor of the cleanness and surface protection for glass. The electric motor for brushes is controlled alone.
5 The machine adopts omni-range auto frequency conversion speed regulation. PLC control system saves waiting time and enhances the production efficiency.
6 This machine can keep washing continuously and discriminate the first and the second piece of glass with no waiting time.
7 The efficiency of this machine is high and can identify LOW-E glass and the coated glass.         
8 It can process triple insulating glass units.
9 It is equipped with vacuum generator and sucker which make glass suction perfect
Technique parameter：
 
Electric voltage
380 V /50 HZ
Total power
21kw
Min glass dimension
600×350mm
Max glass dimension
2500×1800mm
Rinsing speed
2——7.0m/min
working speed
2——10m/min
Max working speed
25m/min
Max glass thickness
40mm
Outside Dimension
16060×2100×3040mm
LBZ1800PNJ Vertical Automatic Insulating Glass Production Line
Features：
1 The main steel structure weldments adopts advanced vibration stress relief and natural stress relief which release the interior stress of the material and the welding point at the most, which ensures the long-term mechanical precision.
2 The rinsing sector and water flow system all adopts stainless steel and rot-proof material and equipped with air-heating device.
3 Rinsing and drying station with air cushion is in favor of rinsing 3-12mm thick glass.
4 Washing brushes consists of nylon and a stainless axle. The hair is imported and heat-resistant in favor of the cleanness and surface protection for glass. The electric motor for brushes is controlled alone.
5 The machine adopts omni-range auto frequency conversion speed regulation. PLC control system saves waiting time and enhances the production efficiency.
6 This machine can keep washing continuously and discriminate the first and the second piece of glass with no waiting time.
7 The efficiency of this machine is high and can identify LOW-E glass and the coated glass.         
8 It can process triple insulating glass units.
9 It is equipped with vacuum generator and sucker which make glass suction perfect
10 The Pressing Robot can be opened which is convenient to inspect
Technique parameter：
 
Voltage
380 V /50 HZ
 General Electric power
25.7kw
Min glass dimension
600×350mm
Max glass dimension
2500×1800mm
Rinsing speed
2——7m/min
working speed
2——10m/min
Max working speed
25m/min
Max glass thickness
40mm
contour size
16080×2100×3040
 
LBZ2200P Vertical Automatic 
InsulatingGlass Production Line
 
Features：
 
1 The main steel structure weldments adopts advanced vibration stress relief and natural stress relief which release the interior stress of the material and the welding point at the most, which ensures the long-term mechanical precision.
2 The rinsing sector and water flow system all adopts stainless steel and rot-proof material and equipped with air-heating device.
3 Rinsing and drying station with air cushion is in favor of rinsing 3-12mm thick glass.
4 Washing brushes are made of nylon and hairs. The hair is heat-resistant in favor of the cleanness and surface protection for glass.
5 The machine adopts omni-range auto frequency conversion speed regulation. PLC control system saves waiting time and enhances the production efficiency.
6 It adopts low-voltage electric elements, sensors. The machine is under PLC control.
7 It can process triple insulating glass units with high efficiency.
8 The Pressing Robot adopts the unique linear guide rail which ensure the parallel pressing quality.
9 It is equipped with vacuum generator and sucker which make glass suction perfect
10 The main spare parts of electric and pneumatic sectors adopt the famous brands home and abroad or the supplier with internationally recognized quality certification.
11 It identifies coated glass from Low-E glass automatically.
12 The tilting table adopts hydraulic system with safety and reliability.
 
Technique parameter：
 
1.       Electric power: 28.62KW AC380V 50HZ
2.       Max glass dimension: 2200×3000mm
3.       Min glass dimension: 420×420mm
4.       Max glass thickness: ≤50mm
5.       Transfer speed: 15——28m/min
6.       Rinsing speed: 1.2——7m/min
7.       Compress air: runoff 0.8m3/min
8.       Air pressure 0.6——0.8Mpa
9.       Water: water and electricity≤50us/cm
10.      Contour dimension: 18800mm×2600mm×3300m
 
 
LBZ2500PⅧ Vertical Automatic Insulating Glass Production Line
Features：
1 The main steel structure weldments adopts advanced vibration stress relief and natural stress relief which release the interior stress of the material and the welding point at the most, which ensures the long-term mechanical precision.
2 The rinsing sector and water flow system all adopts stainless steel and rot-proof material and equipped with air-heating device.
3 Rinsing and drying station with air cushion is in favor of rinsing 3-12mm thick glass.
4 Washing brushes consists of nylon and a stainless axle. The hair is imported and heat-resistant in favor of the cleanness and surface protection for glass. The electric motor for brushes is controlled alone.
5 The machine adopts omni-range auto frequency conversion speed regulation. PLC control system saves waiting time and enhances the production efficiency.
6 This machine can keep washing continuously and discriminate the first and the second piece of glass with no waiting time.
7 It adopts low-voltage electric elements, sensors. The machine is under PLC control.
8 The efficiency of this machine is high and can identify LOW-E glass from the coated glass.
9 It can process triple insulating glass units.
10 It is equipped with vacuum generator and sucker which make glass suction perfect
11 The main spare parts of electric and pneumatic sectors adopt the famous brands home and abroad or the supplier with internationally recognized quality certification.
Technique parameter：
 
1.Max glass dimension: 2500×3000mm
2.Min glass dimension: 500×350mm
3 Rinsing glass thickness: 3——15mm
4.Max insulating glass thickness:48mm
5.Rinsing speed: 2——8m/min
6.Brush:3 pairs
7.Transfer speed: Max25m/min
8.Compress air： flow rate0.8m3/min  
9.Air pressure：1Mpa
10. Electric power: 38KW 3P 380V/ 50HZ
11. Water electric conductivity≤50us/cm
12. Water consumption: 0.5t/h
Linear automatic cutting machine (cutting line )NC1915
Features
1.The three coordinate movement system  are made up of high precision   rack, guide rail, siemens AC servo system and imported coder with high resolution, steady performance, little error, high efficiency.
2. Automatic cutting, the cutting date is controlled by the computer
3. Can cut many specifications on one piece of glass, touch screen, it is convenient operate
Technique parameter
1.Glass dimension: 1800×1400 2.Glass thickness: 2-15mm                     
3. Max cutting speed: 90m/min   4. Cutting precision: depth of parallelism ≤ +/-0.2mm/m   diameter≤ +/-0.2mm/m
5.     Table-board dimension: 1500×2000mm  6.    Contour dimension: 2400×2000×1200
LQJ250 Aluminum Spacing Bar Cutting Machine
Features：
1 The blade cuts the aluminum bar from top down to bottom, which is in conformity with norms.
2 It can cut the glass to different sizes according to different requirements.
3 It can assure the safety and increase work efficiency.
Technique parameter：
Power
380V/50Hz
Total power
0.55Kw(1850r/min)
Saw blade
3880r/min
Saw blade diameter
150/1.2/220
Outside dimension
5300×400×1180mm
Weight
80kg
LWJH2000 Automatic Bar Bending Machine
Features：
1 Human-machine interface adopts
WEIN-VIEW touch screen with easy operation system and good performance.
2 This machine adopts Fuji CNC servo motor feeding and bending system made in Japan
3 Four storage zones can storage four different sizes of 4-6M long aluminum bars. It can process continuously 3 sizes of aluminum bars strictly according to the pre-settings.
4 The machine feeds the aluminum bars and connects the ends automatically. The aluminum bars are 100% utilized except only the cutting ends are slightly worn off.
5 All the operations go on automatically except the aluminum bars loading and removal of the finished aluminum frames manually.
6 The mechanical structure is rationally designed which is convenient to servicing and maintain. The equipment can be stopped by pressing emergency button when the operation goes wrong.
7 It avoids the connection and roundness of aluminum frames. It cuts the aluminum bar automatically.
8 All the operations are free to switch between manually and automatically which is easy to debug and maintain.
9 It can bend into triangle, rectangle, regular pentagon, regular hexagon, right octagon ，circle and etc
10 This machine can set butyl application thickness for rectangle spacers.
11 It changes cutter automatically. it is no need to change the cutter if the width of aluminum bar is over 6mm.
Technique parameter：
1.   Aluminum bar specification：5.5mm～20mm
2.  Max aluminum frame dimension：max2000mm×2000mm
3.  Min aluminum frame dimension：min250mm×250mm
4.  Max feeding speed：120m/min
5.  Air pressure：0.6——0.8Mpa
6.  power：AC 220V 50Hz 4KW
7.  Outside dimension：10000（L）mm×2200mm(W)×2600mm(H)
 
 
 
Semi-automatic aluminum spacer bending machine LZJ02
Semi-automatic aluminum spacer bending machine LZJ02
Main feature:
1. this machine can complete the whole bending procedure automatically and manually after worker put spacer into the machine.
2. PLC control, it is easy operate, reliable positioning,steady runningand large processing range.
Main technique parameter:
1.Dimension: 3400X1600X2300mm
2.Pressure: 0.5-0.8 Mpa
3.Power: 220V
4.Weight: 200kg
5.Windage: 0.5mm
6.Max size: 2000X2000mm
7.Min size: 200X200
8.Weigth: 400kg
SM95 Glass Edge Polishing Machine
Features：
1 This machine is the auxiliary equipment for insulating production line. It is used to cut the glass to size, rub and bevel the edges. this highly enhances the safety and working efficiency.
2 This machine is equipped with dust absorption device which keeps the working environment clean.  
3 This machine consists of main unit and working platform.
Technique parameter：
1.  Electric power：1.5KW     2.  Grinding size：2000×1200mm
3.  Abrasive belt：95mm      4.  Motor rotate speed：1400r/min
5.  Outside dimension：mainframe： 780×386×1270mm
  worktable：1800×1200×820mm     6.   Weight：250kg
ST02 Silicone Extruder
Features
 
■The main parts of ST02 is from America -the well known brand "GRACO”.
 
■the curative agent hydraulic pressure system have two sets of filtration devices, advance the uniformity and curative capability.
 
■ the valve ports of the basic material pump,the curative agent pump and proportioning pump all adopt  the special alloy with zero leakage.
 
■ The rubber mixing system adopt the strip shaker with international static state to-and-fro technology, and the imported mix mandril.
 
Technique parameter：
 
Mixedrate                              6:1~14:1
Base bucket                             55Gallons(200L)
curative agent bucket                   5Gallons(20L)
Max consumed air                     0.8m3/min
Rubber airpressure rate                50:1
Max squeezing pressure               29Mpa
Air-supply pressure                    0.5~0.8Mpa
dimension                            1100×950×1630mm
weight                              650kg
 
 
 
 
ST03 Silicone Extruder
Features：
1 The hardener system is fully enclosed    
and airproof.
2 The valve ports of basic material pump, hardener pump and proportioning pump adopts specially alloy with no leakage.
3 The butyl mixing system adopts internationally popular static-state   mixer with the check pin valve of special structure attached, which make the mixture more uniform
4 The extruding nozzle made of material with special flexibility makes the insulating glass production easier and more convenient
Technique parameter：
Mixedrate                               6:1
Base bucket                         55Gallons(200L)
curative agent bucket              5Gallons(20L)
Max consumed air               0.5m3/min
Max squeezing pressure        20Mpa
Air-supply pressure           0.5 ~ 0.8Mpa
dimension                    1200 ×1100×2500mm
weight                         600kg
Insulating glass butyl sealant coating machine JQJ01
Insulating glass butyl sealant coating machine JQJ01Butyl sealant coating machine extrudes the butyl tape on two sides of aluminum spacer, it works smooth and quick, and it is easy operated. Features:Quick and convenient operation and economic expenses.Inexpensive installation and investment costs. No problem in power service charges and noise.Excellent adhesive force and even butyl surface and safety even in the movement of large-sized glass.Controls height of butyl area.Keeps it easily after blanket operation.
 
Vertical Insulating Glass Production Line LBZ2600P
Vertical Insulating Glass Production Line LBZ2600P
Technical data of the production line Processable dimensions (h x l)
min. 190 x 350 mm  
max. 2600 x 3500 mm
Please observe the notes at the indicated positions, too.
Thickness of insulating glass unit: 12 up to 60 mm
Glass thickness: 3 up to 15 mm   
Laminated glass: preferably rectangular sawn or ground, no protruding foils 
 Electrical connection: 380 V, 3-phases+N+PE, 50 Hz and 220 V, 1-phase, 50 HzVoltage fluctuations: + 6 % to - 10 %  Control voltage: 24 V – DC        Electronic control system: Siemens PLC 
 Ambient temperature: min. 15°C, max. 35°C, following
 DIN 40040Relative air humidity: max. 75 % rel. following DIN 40040        Vertical transport height: 500 ± 20 mm                                 
Inclination of vertical support wall: 6 degrees Compressed
 Air supply: 6.5 bar      Water supply: min. 4.5 bar
The production line is suitable for the manufacture of: Double insulating glass units, rectangular, stepped and Low_E Distance from glass edge to spacer
Outside: adjustable from 2 to 20 mm     Transport speed: v = 48 m/min 
Paint: Deca Design   Working direction: left - right     Labeling: Chinese


 
 
Z-JQZ2620 Semi-automatic glass precision cutting machine
Features：
1. Carling and beam can work separately, can cut the whole glass at one time, high efficiency.
2.  With black felt and air floating device
Technique parameter：
1.       Electric power: 2.2KW  AC380V  50HZ
2.       Glass dimension: 2500×1900mm
3.       Min distance of the cutter box: 25×25mm
4.       Glass thickness: 2～12mm
5.       Depth of parallelism≤±0.15mm/m
6.       catercorner≤±0.2mm/m
7.       Table top dimension: 2600×2000mm
8.       Contour dimension: 2400×2000×1200mm
 
YF30A auto-clave
 Detailed Product Description
YF30A auto-clave consists of autoclave body, autoclave door, circulatory blower, heater, cooling system, electric cabinet etc. It is a specialized machine for production of laminated glass.
 
The glass after vacuum exhaustion and pre-heating & pre-pressing will be put into autoclave to heat, press, and stabilize etc in order to make glass and PVB film stick. It adopts PLC and touch screen control system which has excess temperature and pressure alarm function ensure safety.
 
5.7.2 Technical charactics:
?        Can set up every kind of constant temperature and constant voltage in the gram process.
?        Four grade pressure over pressure alarm function:
n        A Hall-pressure transmitter-pressure overpressure alarm and exhaust
n        Machinery contact pressure gauge inspect overpressure alarm and exhaust
n        Mechanical pressure relief valve of the overpressure alarm and exhaust
?        Three grade overtemp. Alarm function:
n        A thermal resistance temperature control over-temperature alarm and Release, cut off the heat
n        B thermal resistance temperature control over-temperature alarm and Release, cut off the heat
n        Over-temperature mechanical thermometer temperature alarm and Release, cut off the heat
?        Program interlock function: The pressure and the temperature interlocking control, namely the temperature is according to the setting value, does not rise the teperature until come up to the pressure, otherwise, the pressure is according to the setting value, does not rise the pressure until come up to the temperature.
?        Safe interlocking function: The auto-calve gate closing in place signal, the auto-calve gate locking in place signal, the auto-calve gate locked safety signal, lacking one does not start the heating compression procedure.
?        Component safekeeping of security function: The non-axis cooling water, the air blower does not start, heats up does not start.
?        Multifaceted heating and wind loop function: There is multifaceted wind circulatory system in the auto-calve, Multifaceted heating system, the guarantee temperature is evener.
?        Sepcial moving seal function: According to moving seal principle, selects the imported airproof system, guaranteed that seals good under the tendency for long time.
5.7.3 Main Material
?        Door, body of the autoclave: Made from 16MnR
?        Heater: Made from carbon steel
?        Heat interchange: Made from copper pipe and aluminum sheet.
?        Dynamic sealing: Made from carbon steel
?        Insulating material: made from alumina silicate insulating cotton
5.7.4 Major dispositions
?        PLC: Germany SIEMENS
?        Touching screen: Taiwan HItech
?        Electric motor:   Chinese Huali
?        Fan blade:      Centrifugal fan blade Ф750mm
?        Using standard cooling jacket: Wuxi Huazhuang Nuantong factory
?        Cylinder:      Germany BOSCH and Chinese Shenyang Hualong hydro pneumatic factory.
?        Main electrical components: French Schneider and Chinese Tianshui Changcheng Electrical Control Appliance Facotry
 
5.7.5 Main Supply scope
?        Autoclave body              1pcs
?        Autoclave door               1pcs 
?        Circulatory blower            1pcs
?        Electrical cabinet              1pcs
5.7.6 Parameters
Item
Unit
parameter
Remarks
Shell inside diameter
mm
3000
 
Maximum working glass dimension
mm
2500×5000
It could be longer as per buyer’s request
Minimum working glass dimension
mm
350×350
 
Working Pressure
Mpa
1.3
 
Safe valve opening pressure
Mpa
1.4
 
Working temperature
℃
135
 
Working medium
 
Compressed air
 
Inside rail
mm
1050
 
Working cycle of per autoclave
h
3.5-4
 
Insulation method
 
Inside insulation with 80mm in thickness
Could be outside insulation as customer’s request
Pressure testing point
pcs
3
 
Temp. testing point
pcs
2
 
Method of opening door
 
Pneumatic opening door leftward
 
Output of blower
kW
22
 
Total Output
kW
202
 
Weight
t
22
 
Exterior Dimension
mm
About 8150x3850x3500
(L×W×H)
 
Note: The buyer has better equip deionized circulating water to cool the autoclave.
Options:
According to time scale adjust the entering air
According to time scale adjust the temperature reduction
Chose the outer warm keeping
According to CE request chose the maintenance work platform in auto-clave.
Chose the tempered glass isotropic function
Chooses the circulating water of reducing the temperature descaling function which in the auto-clave.
Inter warm keeping would chose the tinfoil to wrap up the insulating compound.
 
 
 
 
LC02 finished glass carry vehicle
 
 
 
 
 
LDS02Aluminum spacing frames hanging conveyor
Features：
1 It is used to convey the butyl sealed frames.
2 It is easy to operate and the performance is excellent.
3 The precise orientation of two photoelectric switch accurately allocate the stopping position.
Technique parameter：
Power
220V/50HZ
Total  power
0.12Kw
Max transfer size
1900×1700mm
Outside dimension
2050×2300×2350mm
Weight
250kg
 
service motor
Equipment Features:
☆   The machine adopts Europe model with neat appearance and good style.
☆   The imported electromotor with the attached blade, the Cutting Angle can be auto-adjusted.
☆   The feeding of the blade is driven by airdraulic damping cylinder, with smooth cutting.
☆   The imported blade with high precision makes the cutting surface smooth.
☆   Several profile processing dimensions can be input one time and make continuous cutting.
☆   The processing dimension can be directly input; the cutting length can be changed without returning the reference point.
☆   The imported service motor with the high moving speed and high precision should drive the sawing head.
☆   The airproof device under the worktable has wonderful crumbs-clearing effect.
☆   The following saw cover keeps it working in the clean environment   
☆   The moving and feeding of the head adopts the imported linear bearing motion to guarantee the precision.
☆   The stuff follow-up supporter can reduce the machine space.
☆     The profile was clamped by three cylinders in every head, and kept the cutting security
Main specification and technical parameter
Power Supply  :380v   50Hz
Cutting motor power   :1.85-2.22kw
Cutting motor Rotational Speed :2830-3400r/min
Operation Air Pressure     :0.6～0.8MPa   
Air consumption  :60L/min
Blade Specification   : ?500mm×?30×4.4  Z=120 （Standard size）
:?500mm×?30×4.4  Z=132 （For spare）
Cutting Speed     : stepless speed regulation 0～3 min
Cutting length   : Max 5000 mm； Min 450 mm
Cutting Width    :150 mm  （?500mm blade）   175mm（?550mm blade）
Cutting Height   :Max 210 mm( 90°) 
Cutting angle  :45°,  90°,  22.5°
Repeat locating length tolerance  : ±0.2mm 
Cutting Profile Surface Plan :≤0.10mm
Cutting Angle tolerance :±5′
Cutting Profile Surface Roughness  :Ra12.5um
ContourDimension :6352mm×1450mm×1650mm   
Weight :about 2500kg
 
 
 
PROFILE         LAMINATOR
 
 
Product
 
Model NO
 
Profile laminator
 
FM-300
 
Profile Laminator
 
FM-1100
 
 
 
 
 
The machine is used for surface colorful lamination of PVC plastic, alu-alloy or reinforced glass doorwindow profile. It uses melt glue and auto-matical friction glue system. The glue box includes bulk melter.  This  machine  can  automatically  remove  dust,  preheating, coat  af-finity  agent,  automatically  friction  coat  protective  film. Using  speed  ad-justment  system,  man-machine  device  is  run  by
English.
 Profile Laminator FM-300
 
Technical parameter
1)       Total power:17KW
2)       Power supply:380V   50Hz
3)       Electric heating:13KW
4)       Transmission power:4kw
5)       Laminating width:20-300mm
6)       Laminating height: 125mm
7)       Laminating speed:0-30m/min
8)        Overall dimention:4000*700*2300(mm)
9)        Weight:3600Kg
* Profile Laminator  FM-1100
Technical parameter
1)       Total power:30KW
2)       Power supply:380V   50Hz
3)       Electric heating:22KW
4)       Transmission power:8 kw
5)       Laminating width:20-900mm
6)       Laminating height: 125mm
7)       Laminating speed:0-40m/min
8)       Overall dimention:11000*1250*2300(mm)
9)   Weight:6000Kg
 
 
 
 
 
 
 
 
 
FOJ Auto Cutting Machine
 
 
 
Equipment Feature:
 
 
This machine is used for cutting of such rolled as PVC,PET, OPP, CPE and aluminum. It is standing type cutting machine.
 
Technical Parameters:
 
1)   Total Power: 2.2 Kw
2)   Voltage: 380V 50Hz
3)   Cutting Thickness: 0.015-0.2mm
4)   Max Diameter of the Coil: 600mm
5)   Max Width of the Profile: 1300mm
6)   Coated Speed: 0-60m/min
7)   Dimension: 2000*1600*1300mm
8)   Weight: 800kg
 
 
 
 
Aluminum cutting Machine-LZQ02
LQJ02 interval of aluminum cutting machine from the rack, bench, drive systems, gas control system and electrical system components, advanced design, compact structure, easy to use. Saw with built-in, safe and reliable; pneumatic and delay control, to ensure cutting cycle of action automatically; high-speed rotation and fine-toothed saw blade characteristics to ensure the cut face after the formation of aluminum intervals.
 
 Main technical parameters
 Motor: 380V 0.25kW 50Hz
   Blade Speed: 6000r/min
  Blade size (diameter × thickness): 180 × 1.2
 Maximum cutting width: 100mm
 Overall dimension (L × H × W): 5500 × 1050 × 750