Step Mobile Cutting Machinery

Working Principle:

   The overturned hanger can overturn the mould 90 in the air, demoulding the blank (body) and puts it on the cutting table together with the side boards .The blank on the cutting table is cut by the longitudinal cutting device through the motor and its own running .After completion and running at the pause position, the blank is cut horizontally by the motor to the center of the blank .The cross cutting holder drops and cuts vertically from up to down until it is reset upward.

Main Technical Date

Main Features of the Machine

1)  The structure of the machine is Simple and practical and it is easy to be installed and maintenance  

2)  After overturning the blank stands vertically with the width of 60mm and the height of 1200mm,thus the cutting wire can be shorter and cutting precision can be more exactly due to that it is not easy to be broken and drifted;

3)  The vertical cutting is done by the vertical cutting device (the blank is fixed on the cutting table )while the horixontal cross ——cutting device is driven by the screw which can ensure even lifting of the cross ­——cutting support and the cutting precision;

4)  As the blank stands vertically ,the grooves on both sides of the blank (with width of 600mm )can be milled at the same time when the blank is cut vertically ,no groove processing device is needed;

5)  The machine can produce  both building blocks and slabs and the blank can be cut into  six sides therefore the quality of product can not be affacted by affection of mould oil and the deformation of the mould;

6)  The machine is easy to control and all the cutting processes of the machine  (overturning ,vertical cutting and level cutting )can be finished in different positions,otherwise the cutting and running are controlled in the same device therefore operation is simplified and maintenance is convenient