APPLICATION

1.  Widely used in pre-cast & ready-mixed concrete, armored concrete and pre-stressed reinforced concrete in key construction projects such as dam and port construction, road building & town planning projects and dwelling erections etc.
2.  Suitable for preparation of flowing concrete,  early-strength concrete, high-strength concrete, Precast vapor-cured  concrete, prestressed concrete and its formulations.

PROPERTIES, FEATURES & CHARACTERISTICS

1.  Appearance: Light brown powder; dark brown liquid. Non-poisonous, odorless, non-    flammable and non-corrosive to steel bars.
2.   Remarkable Plasticity.when the agent is admixed at 0.5～1.5％,water reduction rete up to 12-28%,early strength and strength effect extremely show .Statistically, compression strength on the 3rd day, the 7th day and the 28th  day is increased by 60- 130％, 40-60% and 20-40% respectively.
3.   15-20％ of cement can be reserved when the agent is blended, which is preconditioned by same collapsibility and strength.
4.  Improve miscibility of concrete amalgamator with water and collapsibility as well, As the result, compression strength, tensile strength, buckling strength and modulus of elasticity will be improved to some extent.
5.  Compatible with Portland cement, normal Portland cement, Portland slag cement, fly-ash cement and Portland pozzolanic cement etc.
6.   Used as master batch for preparation of admixtures of different characteristics (such as early strength and water-reducing agent, retarding and water-reducing agent, pumped anti-freezing agent and pumped water-reducing agent, etc.),to fully meet the requirements of different types of construction, construction technology, and temperature terms.

Instruction

1.  Powder: dosage according to cementitious materials ; liquid: dosage as per solid           content
2.  Post-doping is better, appropriate extension the time of mixing in order to facilitate uniform.
3. Adaptability should be tested when mixing with other admixture, mixing with           Polycarboxylate Superplasticizer prohibited 
4.  When expanding admixture, all kinds of fine mineral admixtures, special cement, high early strength cement or other materials containing anhydrite cement used in the concrete admixture,test should be made.

PARAMETERS & ACCEPTANCE CRITERIA （ FOR REFERENCE ）

Item		First grade	Qualified Grade	Actual results	item		First grade	Qualified Grade	Actual results
Water Reduction（%）		≥12	≥10	19	Compression strength,（%）	1d	≥140	≥130	185
Water Penetration（%）		≤90	≤95	79		3d	≥130	≥120	174
Air Content（%）		≤3.0	≤4.0	2.6		7d	≥125	≥115	149
Temporal Distribution for setting（min）	Initial setting time	-90～+120	-90～+120	+12		28d	≥120	≥110	129
	Terminal setting time			+10	shrinkage（%）	28d	≤135	≤135	123
Corrosion to steel bars		none	none	none

BLEND DOSAGE

      Power: 0.5-1.5%; Liquid:1.5-3.0%  The optimal blend dosage:powder:0.55% ; liquid: 1.35%

 

Blend Dosage-Water Reduction Graph

 

DIRECTIONS

　1.   Prepare solutions as required.　
  2.   Direct use of powdery agent is allowed. Alternatively the addition of the agent is   followed  by water moisturization (water-cement ratio:60%).
  3.   The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds.

RACKGING, TRANSPORTATION AND STORAGE

1.   Powder: Woven fabric bag with plastic liner. Net weight: 25kg ± 0.13 kg or 50 kg ± 0.25    kg;or big bag 650kg/750kg.
Liquid: Sealed plastic drums to prevent accidental leakage and evaporation. The material can be delivered or transported by tank car.
2.   Cautions should be taken to prevent form being torn by sharp-ended objects while packages are being transferred or delivered. When being contaminated by high humidity or moisturein case of leakage, it can be prepared in prescribed ways for further use without surrendering any effect.
 3.   It should be stored in a dedicated warehouse that is well-ventilated and dry. It remains effective in one year. After the expiration, date, it can be used again if testing results fall within the established range.
4.  The liquid should be above 15 ℃ temperature use and storage, to avoid the crystallization