Specification:

Pressure of serving water: 0.2-0.4 Mpa

Input pressure: 4.8kg

Output pressure:0-4kg

Input Hydraulic pressure: 2kg

Output Hydralic pressure: 0-2 kg

Size: 250mm*220mm*160mm

Weight: 2.2kb

Standard configuration:

Mainframe 1 pc

Foot control:1pc

Water bottle:600ML/1000ML

Can connect with Dental handpiece:1. 1 High speed handpiece

2. 1 Low speed handpiece

Method of use:

Link:

1. Connect the gas source with the fast interface. Connect water source with filters.

2. According to different reguirements. Connect it with different external accessories and equipment.

3.Turn on water vapor switch

4.Start up food control, regulate the water and gas to the standard of commonly using.

5.Turn of the water after work, shut off the gas source.

USE:

1. Connect it with high speed handpiece adjust pneumatics to 0.2 and adjust conditioning cooling water to be like frost when the handpiece works.

2. Linking sandblasting guns. Adjust pneumatic to 0.3 proper amount of water is suitable. After using first shut off the sndblasting guns them stop it.

3.Connect it with source,adjust pneumatic to 0.3, and adjust the amount of water to make the scaler vibe rate.

4.Connect low-speed handpiece, the greatest pressure regulator can opreat not adjust this valve, if you need to use machines whose air pressure is higher than 0.3.