| Type |
GE200KSx12D |
GE150KSx16D |
GE200KSx18D |
|
Screw Dia.(mm) |
200 |
150 |
200 |
|
Max. Screw Speed (r/min) |
26 |
44 |
33 |
|
Hopper Opening (mm) |
260x210 |
200x165 |
260x210 |
|
Row Quantity of Pin |
10 |
12 |
12 |
|
Pin Quantity of Each Row |
10 |
8 |
10 |
|
Model of Motor |
Z4-280-11 |
Z4-250-21 |
Z4-280-32 |
|
Power (KW) |
250 |
185 |
315 |
|
Zone of Hot Water Circulating |
3 |
4 |
4 |
|
Total Power for Hot Water Heating (KW) |
42 |
48 |
60 |
|
Capacity (Kg) |
2300 |
1200-1800 |
2100-2600 |
|
Overall Dimension (mm) |
6000x3040x2035 |
6000x2500x1995 |
7500x3040x2035 |
|
Weight (Kg) |
13000 |
8000 |
15000 |
|
Zone for Hot Water Circulating for Duplex Extruder Unit |
7 | ||
|
Total Power of Hot Water Circulation Heating for Duplex Extruder Unit (KW) |
128 | ||
Application
The machine is used for extruding half-finished rubber products such as tire tread, sidewall, inner tube, rubber pipe, cable and feeding rubber for calender．
Features
1,The technology for the pin—barrel cold feed extruder is imported from West Gemany. The extrusion head can be chosen for the single extruder according to the requirements to extrude different kinds of rubber products or feeding rubber．Two sets of extruder are arranged according to high and low in different way and fixed angle to extrude radial or normal tire treads, so more uses．
2,Extrusion quantity, which the screw rotates one circle, is 70﹪more than the normal cold feed rubber extruder. Because of fixed a certain number of pins, extruded products has better plasticating and uniform texture．
3,The barrel is equipped with peripheric bores for intensive heating/cooling．Antifriction alloy is welded on its inwall, better adjusting temperature, and long service life；The screw is made of nitrided steel, is processed by N.C. milling machine. It is nitrogen-hardened, so high geometrical accuracy and better wear- resistance.
4,It is equipped with a hot water circulating system to control temperature of each zone automatically.
5,It is equipped with a pressure & temperature pick-up with indicators to know and control the machine.
6,It is driven by a D.C. motor. The gear of the reducer is made of high strength alloy steel and is smaller and less noise.
7,The feed roller, which is side-mounted, is opened or closed hydraulically, and feed rubber evenly and clean easily.
8,The duplex unit and the extrusion complex can be controlled by a computor or relays.