How to use it:
1 When installing into molds,please make sure the space is at least 0.1mm wider than cooling circuit plugs.
2 If there is no specific setting for the coling circuit plugs:first relesae,then using the air spray to reset.
Theory:
According to sloping method,the O-Ring and springs will enlarge to fit the cooling circuit plugs.
Pressure capacity:
Using:
8mm cooling circuit plugs for over 16kg/cm2
10mm cooling circuit plugs for over 17kg/cm2
12mm cooling circuit plugs for over 19kg/cm2
Specialty:
1 No tapping,no rust.
2 Can be adjusted for tightness
3 Can be placed at any water path and moved accordingly.
4 Can be cooling down or heating up by water or oil.
5 Under normal operating temperature:-5~+135°C.
6 Special operating temperature:-10~+280°C .