blow moulding machine
Parameters
Specifications-----------------TCY100series
Material------------------------PA,PE,PP,PVC,LDPE,LLDPE,HDPE
Max container capacity------100--160 L
Number of die set-------------1
Output(dry Cycle)------------280 pc/hr
Machine Dimension（L×W×H）-------6.8x5.3x5.2M
Total weight------------------21.5 ton
Clamping Unit
Clamping force-------------550 KN
Platen opening stroke-----650-1650 mm
Platen size------------------950x1350 mm
Max mould size(W×H)----800x1400-700x1800 mm
Mould thickness-----------680-880 mm
Speed of clamping--------320 mm/sec.
Speed of opening---------300 mm/sec.
Power
Max drive-----------------134.5 KW
Total power---------------201 KW
Fan power for screw-----5X0.6 KW
Air pressure---------------1.0--1.4 Mpa
Air consumption----------2.8 m3/min
Average energy consumption-------90 KW
Extruder unit
Screw diameter-----------------------100 mm
Screw L/D ratio-----------------------L/D 30
Plasticising capacity-----------------220(PP4220) Kg/hr
Number of heating zone-----------zone 5
Extruder heating power---------35 KW
Extruder driving power-------------90 KW
Rotate speed of screw--------------9-87 rev. / min.
Die
Max.volume-------------------------15 L
Max. speed of extruding ----------1.8 kg/sec.
Number of heating zone--------zone 4---6
Power of die heating---------------26 KW
Max die-pin diameter--------------350 mm
Platen distance---------------------650 mm
Points of MOOG-------------------100
Hydraulic system
1 Rated pressure-------------------16 Mpa
1 Rated flux------------------------23 L/min
1 Hydraulic pump drive power---7.5 KW
2 Rated pressure-------------------10 Mpa
2Rated flux-------------------------19/94 L/min
2 Hydraulic pump drive power---37 KW
Servo system
Rated pressure ---------------------16 Mpa
Rated flux--------------------------23 L/min
Hydraulic pump drive power----5.5 KW
Down blowing device
Dilate distance --------------------150--550 mm
Blowing head upward-downward distance---------200 mm
Blowing head upward-downward distance by manual-------250 mm
Max. distance of splint-----------310 mm
Manipulator
Holding distance-------------350 mm
Taking out distance ---------1000 mm
FESTO--------1000 mm
Upward-Downward of the pedestal
Upward-downward distance-------------390 mm
The speed of Upward-downward--------30 mm/min
Power supply
Voltage-----------------------380 V /50HZ
Voltage wave range --------±5％
Electrical Equipment
Touch screen man-machine interface------HITECH
PLC--------------------------------MITSUBISHI
Transducer------------------------MITSUBISHI
Temperature controller----------RKC
Low pressure electrical---------YangMing
Relay------------------------------Schneider
Button switch--------------------Schneider
Electricity machine-------------SIEMENS
Contactor------------------------Schneider
Hydraulic Pressure Part
Oil pump-------------------------YUKEN
Hydraulic pressure valve ------YUKEN
Hydraulic pressure tube-------KIMBERLEV
Airproof-------------------------VALAVA
Air Drive Part
Air diver component---------AIRTAC