|
Acousto-optic |
|
A cousto-optic Q driver has been widely applied to the field such as YAG laser tube, YAG laser Engraving Machine, laser cribbing Machine. It is more convenient operation because the parameter setting,logic function and interface signal of the power supply is controlled by MCU technology. |
Outline dimension：305*444*85mm
RF Maximum output power:50W
Standing wave Ratio less than:1.2
Input voltage:AC220V±15%
Controlled by MCU, accept the standard, TTL level as the control signal for light extraction,adapt to multiple interfaces.
Four control modes (M1, M2, M3, and M4)
Modulated pulse produced inside or input outside.
It has overheat protection inside and the protection of the passive contact at the interface.
Standing wave Ratio less than:1.2
Input voltage:AC220V±15%
Controlled by MCU, accept the standard, TTL level as the control signal for light extraction,adapt to multiple interfaces.
Four control modes (M1, M2, M3, and M4)
Modulated pulse produced inside or input outside.
It has overheat protection inside and the protection of the passive contact at the interface.