SPECIFICATIONS
Specifications
FEATURES
ü 16 × 4 in/out mixer matrix with DRM1~4, Mic1~4, Aux1~8 input & 4 bus output.
ü Up to 4 DRM-8016 remote microphone stations can be connected.
ü 240×128 graphic LCD displayer for monitoring and operating system devices.
ü Balanced input/output.
ü Build-in phantom power for mic 1~4 input.
ü Build-in digital 2 bands HF/LF equalizer & gain controllers on each input channel.
ü Build-in digital 7 bands graphic equalizer & gain controllers on 4 bus output channel.
ü Build-in 8 minutes flash recording memory for pre-recorded auto fire alarm message.
ü Build-in 1 emergency paging microphone for control room paging.
ü 5 steps priority control:
1. Emergency paging microphone
2. Auto fire alarm pre-recorded message
3. Remote microphone station
4. Timer plan with DCS-8001 software
5. Audio source Aux 1~8 and Mic 1~4
ü With DSM-8264 can monitor 16 input and 4 bus output signals.
ü RS-422 full duplex communication with remote microphone stations and other system devices.
ü TCP/IP control protocol through web.
ü RS-232 control port.
ü Come with free PC setup software DCS-8001.
ü Upgradeable flash firmware with RS-232 port.
Model No.
DSC-8300
Aux Input
-10dB, balanced
Microphone Input
-55dB, balanced
Remote Microphone
0dB, balanced
4 Bus Audio Output
0dB, balanced
DRP
Digital Record Playback, 7 Messages Total 480sec;
Factory Setting: English; Message 1: 180s（Auto fire alarm）; Message 2~5: 60s; Message 6~7: 30s;
EQ Control
Treble: ± 12dB at 10kHz; Bass: ± 12dB at 100Hz;
7-band EQ: ± 12dB at 63, 160, 400, 1K, 2.5K, 6.3K, 16KHz;
Frequency Response
Aux: 60Hz~15kHz; ± 3dB；Mic: 100Hz~10kHz, ± 3dB
S/N
± 55dB
THD
<0.5%
Priority Control
EM Mic > Fire Alarm > DRM > Timer Plan > Aux1~8 & Mic 1~4
Phantom Power
DC24V（Supply to condenser microphone input）
RS-422 Serial Interface
Communication Speed: 9600~115,200bps; Default: 19,200bps; Communication Distance: Max 1000m;
RS-232 Serial Interface
Communication Speed: 9600~115,200bps; Default: 19,200bps;
Communication Distance: Max 15m;
TCP/IP Interface
RJ45; 10/100 Base- T
Displayer
240×128 Graphic LCD Displayer（Back Light LED & Contrast Control）
Power Source
DC24V, >3A
Power Consumption
55W
Weight
8kg
Temperature / Humidity
0°C~40°C, <95%
Dimensions
482(W) × 132(H) × 280(D) mm
Shipping Weight
9kg
Shipping Dimensions
58(W) x 23(H) x 46(D) cm