Meltron SATA Solid State Disk 82JM series is compatible with any hardware using SATA bus interface. It can be inserted and removed easily so that it can be installed quickly in many kinds of embedded systems, such as industrial computers, desktops, laptops and Notebook etc.

The 82JM series have good performance, and have small latency time. It effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD) . It is vibration resistance, and can work in lower or higher temperature than HDD. It complies with ATA protocol, no additional drives are required, and the SSD can be configured as a boot device or data storage device. Single-Level Cell (SLC) flash equipped in the device makes sure high fault endurance and long life time, providing the excellent quality for industrial applications.

Meltron SATA Solid State Disk 82JM series just can accept 5-Volt power supplies. It comes in capacity of 1GB~ 8GB. It is a perfect choice of applications requiring high reliability and high tolerance to shock, vibration, humidity, altitude, and temperature, since no moving parts like HDD is in the device. More over it focus on low capacity and low price comparing to HDD. Thus it is a reliable and cheaper alternative to mechanical hard disk drives for applications in a harsh environment.

Features

• SATA 1.0a compliant
• Single power +5 volt power supply
• Cost effective but high performance
• Rugged metal 2.5" SATA Hard Disk Drive
• S/W write protect
• Password lock

Target Application

• Embedded Medical Equipment
• IPC
• Automation
• PDA
• POS System
• GPS
• Ticketing Machine
• Measuring Equipment

Specifications

Capacities	1GB~8GB
Interface	SATA 1.0a compliant
Form Factor	2.5” SSD
Connector	7-pin signal segment, 15-pin power segment SATA connector
Data Transfer Mode	PIO mode 0-6/ MwDMA mode 0-4/UDMA mode 0-4
Data Transfer Rate	Sustained Read: 1GB : Up to 13 MB/s under UDMA-4 of TrueIDE mode. 2GB~ 8GB: Up to 24 MB/s under UDMA-4 of TrueIDE mode. Sustained Write: 1GB: Up to 3MB/s under UDMA-4 of TrueIDE mode. 2GB~ 8GB: Up to 10MB/s under UDMA-4 of TrueIDE mode.
Operation Temp	0°C~+70°C
Storage Temp	-20°C to 80°C
Humidity	10%~95% non-condensing
Vibration	15G
Shock	1000G
ECC Technology	8-bit BCH
MTBF	>1,000,000 hours
Wear-Leveling	Static (Run-time)
DC Input Voltage	+5V single power supply operation
Power Consumption	240mA
Data Write Endurance	1,000,000 times erase/write cycles
Altitude	50,000 ft
Dimension	99.88 (L)x 69.63(W)x 9.3mm(T)
Weight	64.54g
Certificate	CE/FCC/RoHS