The industry standard IDE connector plugs directly into a motherboard using a 44-pin IDE connector in vertical format. This IDE Drive on Module ( DOM) operates in both 5-Volt and 3.3-Volt power supplies. It comes in capacity of 128MB ~ 8GB unformatted disk and it is ideal for embedded applications including Blade Servers, Point of Sale terminals, Casino Gaming machines, Single Board Computers, and Networking Equipment. With built-in wear leveling algorithms, on-the-fly ECC, and no moving parts, It is a very low power design with flash technology ruggedness, reliability, performance and convenience.
FeaturesATA / IDE interface compliant
Capacities up to 8GB
Built-in Wear Leveling and Block Management for ultra-high endurance
DOS/WinCE/Linux/WinXPe bootable
Built-in power-down data protection
Built-in 4 Symbol ECC Engine for high data integrity
Commercial and Industrial operating temperature range
Target ApplicationFactory Automation
Industrial PCs
Robotics
Portable Workstation
Single Board Computers
Networking Equipment.
Specifications
Capacities | 128MB~8GB |
Interface | 44pin IDE/ ATA |
IDE Transfer Mode | PIO mode 0-6 MDMA mode 0-4 UDMA mode 0-4 |
Data Transfer Rate |
128MB (Single):Read-15MB/sec.(max) |
Operation Temp | 0°C~+70°C(Commercial) -40°C~+85°C(Industrial) |
Storage Temp | -45°C~+95°C ( Industrial) -20°C~+80°C (Commercial) |
Humidity | 10%~95% non-condensing |
Vibration | 15G |
Shock | 1000G |
ECC Technology | High reliability base on the internal ECC function |
MTBF | >2,000,000 hours |
Wear-Leveling | Support |
Read / Write Cycle | 2,000,000 times |
DC Input Voltage | +3.3V/+5V single power supply operation |
Power Consumption | 150uA(max.) |
Altitude | 50,000 ft |
Dimension | 48×5.20×32.60mm(W×T×L) |
Weight | 14+/-2g |
Certificate | CE/FCC/RoHS |