Hammer crusher is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc.
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity.
Features of our hammer crusher:
1.The ratio of our hammer crusher is big reduction
2.our hammer crusher is of high crushing efficiency.
3.The hammer crusher is convenient to maintain.
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity.
Features of our hammer crusher:
1.The ratio of our hammer crusher is big reduction
2.our hammer crusher is of high crushing efficiency.
3.The hammer crusher is convenient to maintain.
|
Model |
Feeder Opening (mm) |
Capacity (t/h) |
Motor Power (KW) |
Weight (t) |
|
PC-64 |
600×400 |
12~15 |
18.5 |
1.3 |
|
PC-86 |
800×600 |
18~24 |
55 |
2.5 |
|
PC-0808 |
800×800 |
15~20 |
55 |
5.18 |
|
PC-108 |
1000×800 |
20~50 |
110 |
6.5 |
|
PC-1010 |
1000×1000 |
40~60 |
115 |
7.6 |