A four-column frame structure, hydraulic cylinder placed on the beam, the working piston with a spherical bottom pressure plate, applicability, operating wide-open spaces.
1. Applicable to covers, veterinary floor, ditch cover and other types of spare parts for compression bending test, applicable to a wide range.
2. Testing machine dedicated back to the oil valve and manual valve with the ability to achieve controlled hydraulic cylinders to achieve the value of load, with a pilot power preservation, good operability characteristics. Hydraulic circuit used in the pressure (25MPa) system, pressure is low, not easy to diarrhea leakage, facilitate computer-controlled servo-transformation after transformation, can be programmed. RP-2-type measurement display system. Use of large-size LCM displays the value of load power, thin-film keyboard parameter setting, character tips, intuitive interface.
3. The testing machine applies to covers compression and bending strength test, can meet CJ/T3012-1993 "cast iron inspection covers", CJ/T121-2000 "recycled resin composite material inspection covers" and JC889-2001 "Steel fiber reinforced concrete inspection covers "and other relevant professional standards.
4. In line with national GT/T2611 "testing machine general technical conditions", the state metrological verification JJG139 "tension, pressure, and universal testing machine" standard.
1. Applicable to covers, veterinary floor, ditch cover and other types of spare parts for compression bending test, applicable to a wide range.
2. Testing machine dedicated back to the oil valve and manual valve with the ability to achieve controlled hydraulic cylinders to achieve the value of load, with a pilot power preservation, good operability characteristics. Hydraulic circuit used in the pressure (25MPa) system, pressure is low, not easy to diarrhea leakage, facilitate computer-controlled servo-transformation after transformation, can be programmed. RP-2-type measurement display system. Use of large-size LCM displays the value of load power, thin-film keyboard parameter setting, character tips, intuitive interface.
3. The testing machine applies to covers compression and bending strength test, can meet CJ/T3012-1993 "cast iron inspection covers", CJ/T121-2000 "recycled resin composite material inspection covers" and JC889-2001 "Steel fiber reinforced concrete inspection covers "and other relevant professional standards.
4. In line with national GT/T2611 "testing machine general technical conditions", the state metrological verification JJG139 "tension, pressure, and universal testing machine" standard.
Main technical parameters:
|
Model & Specification |
YYE-600 |
|
Max Test Force |
600kN |
|
Test Force Range |
10-600kN, full regardless of file |
|
Test Force Accuracy |
≤± 1% |
|
Test Force speed adjustment range |
0.5 -100kN / S |
|
Deformation measurement range and accuracy |
0-250mm; 0.1mm |
|
Max Piston stroke |
250mm |
|
compression test Space |
0-350mm |
|
Indenter size |
Φ250mm |
|
Table size (W*L) |
1650*1250mm |
|
Protection |
More than 2%-5% of maximum test power to automatically shut down |
|
Voltage |
380V |
|
Motor power |
2.2kW |
|
Host size(L*W*H) |
1650*1250*2300mm |