Nominal thickness     mm	Tolerance at single point    mm
0.8	±0.09
1.0	±0.11
1.2	±0.12
1.6	±0.14
2.0	±0.15
Note:  1. Normal dimension: 1220±20mm×1020±20mm

No.	Item	Unit	Conditioning	Normal Value	Typical Value
1	Solder float at 260℃, min.	s	A	10	15
2	Peel strength   min.	N/mm	A S-5S/260℃	- 1.0	1.4 1.2
3	Flexural strength   min.	MPa	A	80	100
4	Water absorption   max.	%	E-24/50+D-24/23	-	1.8
5	Dissipation factor   max.	-	C-96/20/65 C-96/20/65+D-48/50	- -	0.05 0.10
6	Dielectric constant   max.	-	C-96/20/65 C-96/20/65+D-48/50	- -	5.5 6.0
7	Insulation resistance  min.	MΩ	C-96/20/65 C-96/20/65+D-2/100	- -	5×104 50
8	Volume resistivity  min.	MΩ·m	E-2/100 C-96/20/65+C-96/40/90	10 100	15 180
9	Surface resistance  min.	MΩ	E-2/100 C-96/20/65+C-96/40/90	30 1×103	70 1.5×103
10	Thermal resistance	-	E-1/180℃	-	No blistering and peeling-off
11	Alkali resistance	-	5%NaOH, 40℃, 5min	-	Without notable changes in appearance