Most drilling fluid formulations contain a base liquid and additives which must be dissolved or mechanically dispersed into the liquid to form a homogenous fluid. The resulting fluid may contain one or more of the following:
- Water-dispersible (soluble) polymers or resins
- Clays or other insoluble but dispersible fine solids
- Soluble salts
The fluids are mixed or sheared for times appropriate to achieve a homogenous mixture and are then set aside to age. Aging is done under conditions which vary from static to dynamic and from ambient to highly elevated temperatures.
Ordering Information and Specifications
| Part No. | Material | Volume | Maximum Working Pressure |
Maximum Temperature | ||
| ml | psig | kPa | °F | °C | ||
| 210285 | 303 Stainless Steel | 500 | 2500 | 17237 | 500 | 260 |
| 210286 | 316 Stainless Steel | 500 | 2500 | 17237 | 500 | 260 |
| 2102882 | 303 Stainless Steel | 260 | 2500 | 17237 | 3501 | 177 |
| 210289 | 303 Stainless Steel | 260 | 2500 | 17237 | 3501 | 177 |
| 2102902 | 303 Stainless Steel | 500 | 2500 | 17237 | 500 | 260 |
| 210291 | 316 Stainless Steel | 260 | 2500 | 17237 | 3501 | 177 |
| 2102922 | 316 Stainless Steel | 260 | 2500 | 17237 | 3501 | 177 |
| 2102943 | 303 Stainless Steel | 500 | 2500 | 17237 | 500 | 260 |
| 2103162 | 316 Stainless Steel | 500 | 2500 | 17237 | 500 | 260 |
1Cells are rated at 350°F (177°C) since allowable sample size becomes less than 200 ml at higher temperatures.
2Cells cannot be pressurized.
3Corrosion coupon holder and gas injection tube are mounted to inner cap.