Richpeace Computerized Flat Knitting Machine is widely used in color jacquard, construction jacquard, and intarsia etc. and characteristic with easy-handling and quick-learnable.
Main Features and Functions:
Model RPK-ASD-52''-12G
Gauge 5G, 7G, 12G, 14G
Knitting Width-----52’’ (132cm)
Knitting Speed-----Servo motor driven, 24 adjustable speed levels, max to1.2m/sec.
Knitting system-----Double cam system, single carriage
Stitch Density-----Stepping motor driven, 24 levels selectable, the stitch cam can be adjusted within 5mm.
Needle election-----8 level full jacquard selection via special solenoid actuators.
Yarn Carrier-----8yarn carriers can be dropped off at any position of carrier rail according to the program setting
Racking-----Servo motor driven. Max 2 inch racking in left or right. 1/2, 1/4, 3/4 pitch also avoidable from any position, and slight error can be compensated fine-tuning function. With two cam systems, loops can be simultaneously transferred to front or rear bed, independent of carriage direction.
Take up Roller-----moment motor controlled, 24 selectable levels, each level has a range of 0 - 99 to be adjusted.
Drive System-----Belt-driven, AC servo motor driven without limits.
Stop Motion-----All necessary devices to stop the machine and give an alarm in case of yarn break, large knot, needle break, fabric press-off, wraparound check, needle smash, racking error, program error, and pieces count etc. Small knot cause several courses at lower speed.
Control System-----10.4''color LCD panels, all kinds of data are showed on and modification possible through, U disk input. The memory on the machine is 32 M, Max goes to 1G, and large amount of patterns can be stored and selected to knit. The pattern design system is easy-handing and used for free, even more upgrading allowable.
Power-----3 phaseAC380V or single phase 220V, 50Hz.
Power-failed protection ----- Correct configuration of knitting process after power failure, without any waste pieces.
Security Devices-----Full clarity safety cover for noise-suppression and dust-proofing with warning marks
Machine Status Lamp-----Green (Normal operation), yellow (Normal stop), Red (Abnormal stop)