| BRASS,COPPER MESH | |
Brass Wire: High brass (80% copper, 20% zinc) wire and low brass (65% copper, 35% zinc) wire have much better abrasion resistance, better corrosion resistance and lower electrical conductivity when compared to copper wire.
Copper Wire:Copper wire offers excellent electrical and thermal conductivity. It is non-magnetic, anti-sparking and is resistant to atmospheric corrosion, salt air and brine.Copper applications are limited due to its low tensile strength, poor resistance to abrasion and common acids.
Phosphor Bronze Wire: This copper-tin (4% to 9% tin, approximately 0.25% phosphorous with the balance copper) alloy wire is corrosion, wear and tear resistant was frequently used in the past for fine mesh cloth.
Packaged with kraft paper and plastic paper,then fasten the two ends use tie wire. For sea or air freight, wooden box will be needed. |
|
Mesh |
Wire Dia. |
Opening(mm) | ||
|
SWG |
mm |
inch | ||
|
6mesh |
22 |
0.711 |
0.028 |
3.522 |
|
8mesh |
23 |
0.610 |
0.024 |
2.565 |
|
10mesh |
25 |
0.508 |
0.020 |
2.032 |
|
12mesh |
26 |
0.457 |
0.018 |
1.660 |
|
14mesh |
27 |
0.417 |
0.016 |
1.397 |
|
16mesh |
29 |
0.345 |
0.014 |
1.243 |
|
18mesh |
30 |
0.315 |
0.012 |
1.096 |
|
20mesh |
30 |
0.315 |
0.0124 |
0.955 |
|
22mesh |
30 |
0.315 |
0.0124 |
0.840 |
|
24mesh |
30 |
0.315 |
0.0124 |
0.743 |
|
26mesh |
31 |
0.295 |
0.0116 |
0.682 |
|
28mesh |
31 |
0.295 |
0.0116 |
0.612 |
|
30mesh |
32 |
0.247 |
0.011 |
0.573 |
|
32mesh |
33 |
0.254 |
0.010 |
0.540 |
|
34mesh |
34 |
0.234 |
0.0092 |
0.513 |
|
36mesh |
34 |
0.234 |
0.0092 |
0.472 |
|
38mesh |
35 |
0.213 |
0.0084 |
0.455 |
|
40mesh |
36 |
0.193 |
0.0076 |
0.442 |
|
42mesh |
36 |
0.193 |
0.0076 |
0.412 |
|
44mesh |
37 |
0.173 |
0.0068 |
0.404 |
|
46mesh |
37 |
0.173 |
0.0068 |
0.397 |
|
48mesh |
37 |
0.173 |
0.0068 |
0.356 |
|
50mesh |
37 |
0.173 |
0.0068 |
0.335 |
|
60meshx50mesh |
36 |
0.193 |
0.0076 |
- |
|
60meshx50mesh |
37 |
0.173 |
0.0068 |
- |
|
60mesh |
37 |
0.173 |
0.0068 |
0.250 |
|
70mesh |
39 |
0.132 |
0.0052 |
0.231 |
|
80mesh |
40 |
0.122 |
0.0048 |
0.196 |
|
90mesh |
41 |
0.112 |
0.0044 |
0.170 |
|
100mesh |
42 |
0.012 |
0.004 |
0.152 |
|
120meshx108mesh |
43 |
0.091 |
0.0036 |
- |
|
120mesh |
44 |
0.081 |
0.0032 |
0.131 |
|
140mesh |
46 |
0.061 |
0.0024 |
0.120 |
|
150mesh |
46 |
0.061 |
0.0024 |
0.108 |
|
160mesh |
46 |
0.061 |
0.0024 |
0.098 |
|
180mesh |
47 |
0.51 |
0.002 |
0.090 |
|
200mesh |
47 |
0.51 |
0.002 |
0.076 |