Features
Fiber core can be display clearly
SingleX or Y view and X & Y view simultaneously
Auto check quality of cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color LCD monitor with clear digital image display
Simple Operation menu
SingleX or Y view and X & Y view simultaneously
Auto check quality of cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color LCD monitor with clear digital image display
Simple Operation menu
|
Specefications |
|
Model |
KL-280 |
|
Applicable fibers |
SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) |
|
Fiber cleaved length |
8~16mm（Coating diameter：250μm）
16mm（Coating diameter: 250 ~ 1000μm） |
|
Fiber diameter |
Cladding diameter：80 ~150μm
Coating diameter：100~ 1000μm |
|
Fiber Count |
Single |
|
Fiber aligning method |
Core aligning |
|
Return loss |
＞60dB |
|
Actual average splice loss |
0.02dB （SM）,0.01dB (MM),
0.04dB (DS),0.04dB( NZDS) |
|
Splicing mode |
auto |
|
Splicing mode |
12(templet), 188(user) |
|
Typical Splicing time |
Typical 9 sec，with standard SM fiber |
|
Protection sleeve length |
60mm, 40mm and a series of micro sleeves |
|
Storage of splice result |
5000 results，3 parameter per result |
|
Tension test |
2N |
|
Fiber display and magnification |
400X（X or Y view）,200X（X and Y view） |
|
Tube heating time |
Typical 30 sec |
|
Electrode life |
2500 |
|
No.of splice/heating with battery |
Typical 130 cycles (splice/tube heat) with inner Li-battery |
|
Display screen |
5 inch color LCD monitor |
|
Image change over |
The fiber image is turned upside down |
|
Terminals |
RS 232 |
|
Operating condition |
0 ~ 5000m above sea level,0 ~ 95%RH and -10～50℃,respectively,Max. wind velocity of 15m/s |
|
Power supply |
AC 100-240V with AC adapter;inner Li-battery(6600mAH) |
|
Dimensions |
150mm(L) x150mm (W) x160mm (H) |
|
Weight |
3.52 Kg including battery |