YT building use water paint which is antibacterium, rot resistance and negative ion.

Luster : sub-polishing, mercerizing　　　　　　

Scrub-resistance >10000times，Color: mix color randomly， Contrast ratio ≥0.95，Contaminate resistance ≤10%

Use methods

◆It can used by brush coating, roller coating, spray coating and high pressure air-free coating. It is recommended to use spray gun with the 2mm diameter of nozzle, working pressure is 0.5-1Mpa.

◆it can be diluted by water, the first step adds 5-10% water, second step add 5% water, while diluting, please stir to mix thoroughly.

◆the dosage: Theoretically, 8 square meter per kilo (once) .Actually, it changes while the Construction way different and the surface roughness different

◆Drying time: surface drying time 30 minutes, under standard condition (temperature: 23 ℃±2, relative humidity 50%±5 ), actually drying time is 2 hours. Re-coating time 4 hours (changes while the environmental temperature and humidity Changes)

1. The basic level should be firm, clean, oil-free, moisture content <10%, PH < 10

2. The basic level should be sealed first, it’s better to use our match products P-01 Alkali-resistant seal coat.

3. Environmental temperature should over 5℃, and the humidity under 85%.

4. All tools should be clean immediately by water or detergent while finished using.

1. It should be stored in a cool, clean and dry place; the temperature should between 2℃~35℃.

2. It should be covered immediately after finished,

3. Well packing products, the shelf life is 12 months.