Place of Origin |
Taiwan |
Model Number |
FM-50D,FM-50G |
Processing |
Drilling Machine |
Product Features |
- Device of cutting force control:
While cutting on high hardness or problem material of steel, or deep hole drilling results in difficult scrap discharging, cutter would probably be damaged. In such cases, this device would temporarily stop feeding until resistance is reduced or scrap is gradually discharged, cutter could regain feeding again till this hole is perforated. This device could protect cutter from being broken or damaged in such cases.
- Protective function of device of cutting force control:
After perforating, even auto-feeding motion is lasting to the end of stroke (operator forgets to lock fixing bolt), under the function of this device both gang gear tube and machine body won't be damaged.
- Auto step-feeding device:
While using FM-50D for perforating, this device could discharge scrap step by step automatically.
- Rapid adaptor design:
Drill sleeves, borer holder and tapper set are all rapid adaptor design,convenient for replacement of cutters and increasing effciency.
- Coolant tank:
It is integrated with machine body, more stable. This could reduce damage resulting from out going impact.
- The most suitable for drilling or tapping on heavy work-pieces that is difficult to be moved, such as production of machine tools, steel skeleton of building, H type steel, big steel plate and steam furnace..etc.
|
Specifications
Model |
FM-50D |
Power(AC) |
110V |
220V |
Motor Rated Output |
1350W |
1350W |
Motor Rated Ampere |
12A |
6.5A |
R.P.M. |
380 730 |
Freeding Stroke |
82mm |
Hole Capacity |
5/8"~2" 16~52mm |
Magnetic |
200x112x78mm |
Magnetic Force |
1500kgs |
Height |
490mm |
Machine Weight |
32kgs |
* These specifications and shape may be changed for improvement without prior notice.
Specifications |
Model |
FM-50G |
Power(AC) |
110V |
220V |
Motor Rated Output |
1350W |
1350W |
Motor Rated Ampere |
12A |
6.5A |
R.P.M. |
380 730 |
Freeding Stroke |
82mm |
Hole Capacity |
5/8"~2" 16~52mm |
Magnetic |
200x112x78mm |
Magnetic Force |
1500kgs |
Height |
480mm |
Machine Weight |
27kgs | |
* These specifications and shape may be changed for improvement without prior notice.
Product Features |
- Rapid adaptor design:
Drill sleeves, borer holder and tapper set are all rapid adaptor design,convenient for replacement of cutters and increasing effciency.
- Coolant tank:
It is integrated with machine body, more stable. This could reduce damage resulting from out going impact.
- The most suitable for drilling or tapping on heavy work-pieces that is difficult to be moved, such as production of machine tools, steel skeleton of building, H type steel, big steel plate and steam furnace..etc.
|