1)toilet flush valve + 2)toilet fill vale + 3)dual push button
1)1. Height adjustable 7.5"-11"(9.5"-14"); Water pressure 0.02-0.8MPa
2. Membrane design, good performance;
3. Intermal float, Value can close instaneously; Adjust the position of the float to control the water level.
4. Clip in special design to ensure the height of fill value fixed.
5. Inside drain guard keeps impurity out of value, and easy to clean.
6. Optional G1/2", G15/16" POM plastic thread.
2)
1. Full flush and half flush function;
2. Adjust the half flush float cup up and down, the higher the float cup is, the smaller the half flush volume is;
3. Adjustable full flush piece, when put it from up to down, full flush volume increase;
4. Silicon seal is free from leak;
5. To be applicable to 1-pc toilet or 2-pc toilet;
6. The flush valve body is buckled wirh base by rotating buckle and is easy to install and maintian;
7. Flush valve height 7.1"-11.8".
3)
1.Diamter 38mm, 48mm, 58mm;
2. Soft touch and easy push;
3. Half flush button and Full flush button.
4. Material: POM and ABS.