|
Labeling Machine Capacity:
|
15-25Bot/min
|
|
Diameter of container:
|
φ40mm - φ110mm
|
|
Size of label:
|
(length× high) 80-370×20-140mm
|
|
Motor Power:
|
0.37kw
|
|
Heating Power:
|
1.5kw
|
|
Voltage:
|
three-phase 380V
|
|
Weight:
|
150kg
|
TP-LBM-S3 is the combination of the operating experiences on LL1 and the advanced German technology. It is applicable to paper labels cylindrical containers with small amount but multiform size.
When the size of containers and labels are changed , parts changeover is not necessary. After a few minutes' djustment the machine will come into working condition.
The operator should only put and take off bottles from the machine. While the labels are fed, aligned and applied automatically.
Hot-melt glue is used.
To guarantee a constant viscosity of hot-melt, the temperature is controlled by an electric thermostat.
When the size of containers and labels are changed , parts changeover is not necessary. After a few minutes' djustment the machine will come into working condition.
The operator should only put and take off bottles from the machine. While the labels are fed, aligned and applied automatically.
Hot-melt glue is used.
To guarantee a constant viscosity of hot-melt, the temperature is controlled by an electric thermostat.