NSRL-005 By using the world groundbreaking Pipe Cooling Technology, we achieved a better coolant system than

regular aluminium. Optimised fluid evaporation and condensation to transfer heat and apply our thermal
controlled air-cooling technology, our E40 LED light is more powerful, compact, bright and has better thermal
dissipation.

Unique Integrated lens and cover design. Special arrangement of the lens provides a better light focus and
greater light efficiency. This special design also reduced the weight of the LED lamp system, making it

extremely compact and easy to fix.

The first E40 designed by controlling the temperature of high power LED street lights. Temperature controlling

systems protect the LED light and achieve a longer life-cycle. When the temperature is higher than 70℃ (+/-

5℃), the temperature controlling system is active to provide protection by lowering the current by 50%. When

the temperature drops to 50℃, the current will be adjusted back to normal. 

Using a common standard base, which is adjustable to a full 360 degree angle, it can be rotated as needed to any

angle after the lamp is tightened to achieve the best lighting position.

With its light weight and compact appearance, our high-power LED street light can effectively reduce the air
resistance and its weight on the pole, increasing the safety factor.

Supplied through an AC-DC driver, gives a stable current and a continuous temperature control system. The

intelligent controlling system embedded in our LED lights will accurately rovide continuous current even when

the power supply is unstable.

Wide Working Voltage（85-260 VAC）Use PWM technic,  efficiently, lower thermal, more accurate.

Non-polluting to the power supplying network. Power factor≥0.9, THD≤20%, EMI is up to par with the global

standard. Reducing energy loss and avoiding high frequency pollution to the power network.

Combined with Solar Energy, our LED streetlight is highly energy-efficient and always works reliably at low

voltages. Also can combined Solar Energy with main supply according to your local Solar Energy source.

High Luminous efficiency. The LED's Luminous efficiency is more than 90 lm/w,and it can reach as high as 200

lm/w when LED brightness increases dramatically. At this point,HPS 400W will be directly replaced by 100W LED

streetlight, and it will achieve even better energy savings when it reaches a level of 300lm/w.