Technical Requirements

Description

 

Ribbon/Lace Input Device- 1 set

Input Wheel- 1 set

Tape/Ribbon Sub branch device-4 pcs

Drived Motor ---(AC Motor : 0.5 HP)

Input Tape Width : 200 mm

0.5HP

Dying Slot Device

(2 sets controlled by tension,dying elastic tape/lace controlled by balance 

Hammer,dying non-elastic lace/tape controlled by Cylinder tension shelf )

PU Roller ( Up and Down) ----- each 1 pc

PU Roller ( Middle)  -----1 pc

Button Cylinder ---2 pcs

1HP

Steamer

(2 sets controlled by tension,dying elastic tape/lace controlled by balance 

Hammer,dying non-elastic lace/tape controlled by Cylinder tension shelf )

Steamer Size : Length X Width X Height: 2140mm×700mm×2150mm

One steamer has 45 m lace/tape travese/travel distance

Two sets steamers heat mode : electronic heat and steam heat

Dying Polyester Tape/Lace, using High Degree Temperature electronic Heat

Dying Nylon Tape/Lace,using steam heat

Steamer with 2 pcs of temperature sensors,2 pcs Thermometer,the protection of high degree temperature ,steamer temperature controll one thermometer

The surface of steamer have 1 pc steamer mechnical thermometer

Through 2HP motor,inventor controled ,Sprocket connection Transmission

1 pc electronic Solenoid controll steamer with 4 pcs of

Sub-Branchs

Steam through Pipeline indirect make heat,the top of steamer case has one input and output place

 

2HP

Washing Device, with 3 sets of washing cheese ,first one is cold water

(2 sets controlled by tension,dying elastic tape/lace controlled by balance 

Hammer,dying non-elastic lace/tape controlled by Cylinder tension shelf )

Washing cheese is made by stainless

Each washing cheese has 2 pcs roller with diameter 100mm X 200mm

Through Air pressure controll the rollers,every 2 sets of washing cheese drived by 2HP motor, total 2 group

3 pcs of washing cheese each have water Intake and Overflow nozzle,have 2 pcs with steam direct make heat,and with 2 pcs Thermostats

Guide shaft Through motor drived chain transmission

Every two washing cheese through 1 group tension device controlled

2HP

Sizing Device-1 set

PU Rubber Roller 2 pcs diameter 100 mm X 200 mm

Roller Through Air pressure controlled ,with 1 pcs sizing slot

 

 

 

Stainless Drying Cheese Device-2 sets

 (2 sets controlled by tension,dying elastic tape/lace controlled by balance 

Hammer,dying non-elastic lace/tape controlled by Cylinder tension shelf )

Hot/iron cheese diameter 570mm X Length 500 mm 2 pcs , can around lace /tape 3 times, spray Teflon in the surface ,heated by electrocity

2 HP motor drived ,1 group tension controlled

The top have pressure roller ,one side is fixed and the other side is level

and can adjustable

Aluminum

Isolation tape seperated device shelf -1 set

1HP

Tape/Lace tightening roller device ----1 set

 (2 sets controlled by tension,dying elastic tape/lace controlled by balance 

Hammer,dying non-elastic lace/tape controlled by Cylinder tension shelf )

Tape/Lace tightening roller diameter 100 mm X 200 mm,through cylinder controlled,drived by 0.5 HP motor

2 pcs of tape /lace tightening nozzle device

Electrostatic devices

0.5HP

Control cabinet- 1 set

Digital temperature controller, speed controller and tension controller

 

Machinery covered space:6800cm×1200cm×2150cm

 

Machine effective usage Width: 200 mm ,one time can pass 1-2 lace/tapes ,the speed is : 0-30 /minute

 

Working TemperatureWhole Case

 

 

Total Power :5.25KW +(25KW when dying polyester high degree temperature)

 

 

Customer Need Ready Accessory:

Air Compressor

1.  Air Compressor -2 HP

2.  Boilers:50kgs

3.  Regulator

4.  All steam pipeline ,water pipeline and electronical wire