Heat Shrink Cable End Cap
Model: HSEC
Applications
Designed with a layer of spiral coated hot melt adhesive in the internal surface of the end cap, which provides highly resistant to moisture, fungus, and weathering, and recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths.
|
Technical Data |
|
Property |
Test Method |
Typical Data |
|
Operating temperature |
IEC 216 |
-55 to +110 |
|
Tensile strength |
ASTM D 638 |
14 MPa |
|
Elongation at break |
ASTM D 638 |
400 |
|
Density |
ASTM D 792 |
1.05 |
|
Elongation at break after aging |
150, 168hrs |
300 |
|
Dielectric strength |
IEC 243 |
15KV/mm |
|
Volume resistance |
IEC 93 |
1014Ω.cm |
|
|
Specification unit(mm) |
|
Order
Ref.
Number |
Inner Diameter |
After fully
recovered Length
± 10 |
After fully
recovered Width
± 10 |
Cable diameter |
|
As supplied
(min) |
After fully
recovered (max) |
|
Standard length end cap |
|
HSEC-12/ 4 |
12 |
4.0 |
40 |
2.6 |
4-10 |
|
HSEC-14/ 5 |
14 |
5.0 |
45 |
2.2 |
5-12 |
|
HSEC-20/ 6 |
20 |
6.0 |
55 |
2.8 |
6-16 |
|
HSEC-25/ 8.5 |
25 |
8.5 |
68 |
2.8 |
10-20 |
|
HSEC-35/ 16 |
35 |
16.0 |
83 |
3.3 |
17-30 |
|
HSEC-40/ 15 |
40 |
15.0 |
83 |
3.3 |
18-32 |
|
HSEC-55/ 26 |
55 |
26.0 |
103 |
3.5 |
28-48 |
|
HSEC-75/ 36 |
75 |
36.0 |
120 |
4.0 |
45-68 |
|
HSEC-100/ 52 |
100 |
52.0 |
140 |
4.0 |
55-90 |
|
HSEC-120/ 60 |
120 |
60.0 |
150 |
4.0 |
65-110 |
|
HSEC-145/ 60 |
145 |
60.0 |
150 |
4.0 |
70-130 |
|
HSEC-160/ 82 |
160 |
82.0 |
150 |
4.0 |
90-150 |
|
HSEC-200/ 90 |
200 |
90.0 |
160 |
4.2 |
100-180 |
|
Extended length end cap |
|
HSEC-L-14/ 5 |
14 |
5.0 |
55 |
2.2 |
5-12 |
|
HSEC-L-42/15 |
42 |
15.0 |
110 |
3.3 |
18-34 |
|
HSEC-L-55/ 23 |
55 |
23.0 |
140 |
3.8 |
25-48 |
|
HSEC-L-62/ 23 |
62 |
23.0 |
140 |
3.8 |
25-55 |
|
HSEC-L-75/ 32 |
75 |
32.0 |
150 |
4.0 |
40-68 |
|
HSEC-XL-75/ 36 |
75 |
36.0 |
170 |
4.2 |
45-68 |
|
HSEC-L-105/ 45 |
105 |
45.0 |
150 |
4.0 |
50-90 |
|
|
|
|
|
|
|
End cap with valve is available on request. |
