Description
TH3056 is formulated with a variety of additives such as good quality detergent, dispersant and high performance ashless antioxidants, etc. The high performance ashless antioxidant is well compatible with various functional additives and has fine performace.
TH3056 is formulated with a variety of additives such as good quality detergent, dispersant and high performance ashless antioxidants, etc. The high performance ashless antioxidant is well compatible with various functional additives and has fine performace.
Applications
The product can be used to blend the gasoline engine oils below API SF grade.
The product can be used to blend the gasoline engine oils below API SF grade.
|
API grade |
Treating rate (m%) | |
|
Mono-grade |
Multi-grade | |
|
SF |
6.0 |
6.7 |
|
SE |
5.0 |
5.8 |
|
SD |
4.0 |
|
|
SC |
3.0 |
|
Above treating rates are calculated by addition method. This package is suitable for preparation of SAE30, 40, 50, 10W/30, 15W/40 internal combustion engine oils blended with GroupⅠandⅡbase oil. The quality complies with API standard.
Characteristics
|
Item |
Typical value |
Test method |
|
Density (20oC), kg/m3 |
Report |
ASTM D1298 |
|
Flash point (COC), oC |
170 |
ASTM D92 |
|
Kinematic viscosity (100oC), mm2/s |
72.6 |
ASTM D445 |
|
TBN, mgKOH/g |
100 |
ASTM D2896 |
|
Sulfate ash, m% |
11 |
ASTM D874 |
|
Zn, m% |
1.30 |
ASTM D4927 |
|
P, m% |
1.1 |
ASTM D1091 |
|
Ca, m% |
2.3 |
ASTM D4927 |
|
N , m% |
0.8 |
ASTM D3228 |
|
Mg, m% |
0.51 |
ASTM D4927 |
|
Mechanical impurities, m% |
0.09 |
GB/T511 |
Packing,Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/T0164.
Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-65oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.