Description
TH3318 is formulated with a variety of additives such as superior detergent, dispersant, antioxidate/ corrosion inhibitor, etc. The oil prepared from TH3318 possesses the properties of low ash, fine dispersibility and antioxidation, applicable to natural gas engine as well as gasoline engine.
TH3318 is formulated with a variety of additives such as superior detergent, dispersant, antioxidate/ corrosion inhibitor, etc. The oil prepared from TH3318 possesses the properties of low ash, fine dispersibility and antioxidation, applicable to natural gas engine as well as gasoline engine.
Applications
|
API grade |
Treating rate (m%) | |
|
Mono-grade |
Multi-grade | |
|
SF |
6.0 |
6.8 |
|
SE |
4.5 |
5.0 |
Above treating rates are calculated by addition method. This package is suitable for preparation of SAE 30, 40, 50, 10W/30, 15W/40 internal combustion engine oils blended with Group Ⅰ and Group Ⅱ base oil, and the quality complies with API standard.
Characteristics
|
Item |
Typical value |
Test method |
|
Density (20oC), kg/m3 |
Report |
ASTM D1298 |
|
Flash point (COC), oC |
170 |
ASTM D92 |
|
Kinematic viscosity (100oC), mm2/s |
78 |
ASTM D445 |
|
TBN, mgKOH/g |
73 |
ASTM D2896 |
|
Sulfate ash, m% |
8.9 |
ASTM D874 |
|
Ca, m% |
1.62 |
ASTM D4927 |
|
N, m% |
0.95 |
GB/T3228 |
|
P, m% |
1.51 |
ASTM D1091 |
|
Zn, m% |
1.79 |
ASTM D4927 |
|
Mechanical impurities, m% |
0.09 |
GB/T511 |
Packing,Transportation and Storage
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/T0164.
1, The package is packed in metal drum of 200 litres. Avoid contacting with strong oxidizer.
2, Ambient temperature for storage should not exceed 50oC. Entering of water and impurities is strictly forbidden.
3, The packing, marking, transportation, storage and delivery acceptance should meet the requirement of SH/T0164.
Points for Attention
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-65oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.
1, The package is a kind of functional additive package, applied by adding with antifoam agent.
2, The recommended temperature for blending of oil is 60-65oC.
3, The temperature of heating steam for transferring and blending should not exceed 110oC.