A.It  is  the third-generation  new  breaker  and collects broken stone materials and the reshaping together ,compared with the under-medium-hardness breaking and reacting, it can save investment by more than 40%, the finished product rate is above 20-30%, the grain shape is good, the powder is lower than20-30%.

B.As adopting the technological design, compared with the same type of  product, the yield is higher, the rate of finished product is higher, the energy consumption is lower, and the quality surpasses the similar products.

C.The product takes the principle of "Quality superiority", mainly has six advantages.

a.The body uses gas to protect the welds, through the technological performance of vibrating expiration, the toughness of structure is stronger.

b.Rotating parts are processed and with quality-adjusting treatment by the numerical control center. The toughness is higher.

c.The hammer plate was processed by the high-toughness materials, through the overlaying treatment, the appearance is more anti-resistance.

d.The hammer head use the pure high-chromium alloying material. The tensile strength and the wear-resisting property is better.

e.The screen board and the protecting board use the design idea, the anti-hit, the resistance to wear is stronger.

f.The outlook design and the strengthened intrinsic quality make the performance to be more superior.

 

1.Widely applied to the 1-step, 2-step break of all sorts of materials whose compressive strength is under medium hardness.

2.Especially be used for the materials' break in mine, building materials, roads&bridges, chemical industry and metallurgy.

 

Model	Max. Feed Size (mm)	Discharge Size  (mm)	Capacity (t/h)	Motor power (KW)
PC-0808	≤500	<40	30-50	45
PC-0810	≤500	<40	60-90	55
PC-1010	≤600	<40	80-120	90
PC-1210	≤600	<40	90-150	110
PC-1312	≤700	<40	120-180	132
PC-1513	≤700	<40	130-250	160
PC-1813	≤800	<40	150-300	200
PC-2113	≤800	<40	180-350	220
PC-2413	≤900	<40	200-400	250
PC-1515	≤900	<40	180-350	220
PC-1815	≤1000	<40	200-400	250
PC-2115	≤1000	<40	250-450	280
PC-2415	≤1000	<40	300-500	315

Remarks:

1.The data listed above is by the standards of the following: the limestone's break, the humidity ≤8%.The power's allocation is chosen according to the actual broken demands. The variable data won't be forecasted by themselves.

2.The feeding quality, feeding shape and grain size etc. elements will affect the machine's processing ability.