| ITEMS | DESCRIPTION |
| Model: W136 | 3 ton wheel loader, with air conditioner |
| Main Standard Configuration | |
| Bucket Capacity | 1.8 or 2.2 m3 |
| Rated Load | 3200kg |
| Travelling Speed | |
| Forward 1st | 0-10.8km/h |
| Forward 2nd | 0-32.5km/h |
| Reverse 1st: | 0-14.5km/h |
| Max.Traction | 97±5kN |
| Max.Break Out Force | 100±5kN |
| Min. Turning Radius (outside tires) | 5376±50mm |
| Max. Dumping Height | 3060±50mm |
| Max. Reach | 1008±50mm |
| Total Hydraulic Cycle Time | ≤10.3s |
| Full Bucket Lifting Time | ≤5.6s |
| Wheel Base | 2750±30mm |
| Tread Width | 1800±10mm |
| Dimensions (LxWxH) | 6970±100x2245±50x3286±50mm |
| Min. Clearance Over Ground | 360±20mm |
| Operating Weight | 10000±100kg |
| Diesel Engine | |
| Model | Yuchai/Duetz/Cummins |
| Type | Direct injection, water cooling, 4 strokes, |
| Rated Output | 92/92/97kW |
| Rated Speed | 2200rpm |
| Max. Torque | 460N.m/500N.m/560N.m |
| Transmission | |
| Model: | self made |
| Rated Input Speed: | 2200rpm |
| Transmission Type | two forward and one reverse gears/power shift, planet type |
| Mechanical Gear Ratios | |
| Gear I | 2.576 |
| Gear II | 0.691 |
| Reverse | 1.8846 |
| Hydraulic Oil Pressure | 1.10-1.40MPa |
| Inlet Oil Pressure Of Torque Convertor | 0.33-0.5MPa |
| Outlet Oil Pressure Of Torque Convertor | 0.1-0.20MPa |
| Lubricating Oil Pressure | 0.10-0.20MPa |
| Max. Permissible Temp & Outlet Of Torque Convertor | 120℃ |
| Transaxle & Tire | |
| Transaxle Type | Fenyi |
| Drive System | 4 wheel drive |
| Rear Axle Oscillation | Center oscillation |
| Oscillating Angle of Rear Axle | 12° |
| Carrier Assembly Reduction Ratio | 4.375 |
| Wheel End Reduction Assembly Reduction Ratio | 4.75 |
| Tire | 17.5-25 |
| Pressure Of Tire | 0.28-0.32MPa |
| Working Hydraulic System | |
| Working Pump Type | Gear Pump |
| System Working Pressure | 16MPa |
| Lifting Cylinder Bore x Stroke | 125x816mm |
| Tilting Cylinder Bore x Stroke | 140x553 mm |
| Steering System | |
| Type | full hydraulic power steering system |
| Steering Pump Type | CBY2050 (reverse) |
| Max. Working Pressure | 10MPa |
| Steering Cylinder Bore x Stroke | 80x340mm |
| Max. Steering Angle | ±36o |
| Brake System | |
| Type | Air over hydraulic disc on four wheels brakes |
| Oil Injection Capacity | |
| Fuel Tank | 150L |
| Engine Oil | 15L |
| Transmission | 27L |
| Hydraulic Oil Tank | 140L |
| Transaxle | 30L |