The wine opener sets operation instructions is as below.

1. Place the cutter on the top of the wine bottle, and use the knife cut the cover paper, then turn 60.

2. Place the corkscrews needle in the middle of the cork, and let the sleeve around the wine bottles top.

3. Press the corkscrew to pump air into the bottle by lifting and lowerint corkscrews coat, until the cork slide out of the bottle. (As a rule, 4~7 pumps per bottle is appropriate. )

4. Push the plastic slider of sleeve to make the cork away from the corkscrews needle.

CAUTION:

1. Dont use this corkscrew for plastic cork and sparking wine.

2. Pls keep the corkscrew out tof childrens reach, because the needle and clippers knife are very sharp.

3. If the bottle is defective, the times of pumping must not over 12 pumps per bottle.