Application and features:
*Applied to fabricate PE, PP, PVDF elbow, tee, cross fittings in workshop. Also used to lengthen the injection moulded fitting and make the integrated fittings.
*Integrated structure. Nothing remains but to choose the different special clamps while fabricating different fittings.
*Removable PTFE coated heating plate.
*Electric planing tool with safety limit swith enable to start it only when it is locked in the operation position.
*Low starting pressure and high reliable seal structure.
*Separate two-channel timer records times in soaking and cooling phases.
*Digital pressure meter enables to control pressure accurately.
*Linear guide ways are equipped with heating plate, planing tool and dragging plate.
*Products comply with 98/37/EC and 73/23/EEC standards.
Optional parts:
*Special clamps for welding flange stub.
*special clamps for short spigot fittings.
Technical parameters:
Model | SHG1200 | |
Pipe size(mm) | 630,710,800,900,1000,1200 | |
Application | 0~90 degrees elbow, tee, cross | |
Heating plate max. temp. | 270 degrees C | |
Temp. Deviation in surface(170-250 degrees C) | ≤ ± 10 degrees C | |
Pressure adjustable ranges | 0~16 MPa | |
Working voltage | 380 V, 50 Hz | |
Heating plate power | 62 KW | |
Planing tool power | 4.0 KW | |
Hydraulic unit power | 7.5 KW | |
Total power | 73.5 KW | |
Total weight | 18000 KGS |