It is very smart charger which can auto-switching output.
- It can charge any 2.4-14.4V Ni-MH/Ni-Cd battery pack which capacity is more than 1000mAh.
- The charger will cut off automatically if battery is fully charged.
- MCU control the whole charge process and guarantee the battery pack get fully charge,avoid the battery pack over-charge.
- Led indicate the charge status,red and green led flash for 2 times after plug-in ,then both off,red led on in charging, green led on after fully charge.end charge by negative delta V or peak voltage detection,red led flash in error status.
- Dimension:96.0X44.0X28.0mm
- It can charge any 2.4-14.4V Ni-MH/Ni-Cd battery pack which capacity is more than 1000mAh.
- The charger will cut off automatically if battery is fully charged.
- MCU control the whole charge process and guarantee the battery pack get fully charge,avoid the battery pack over-charge.
- Led indicate the charge status,red and green led flash for 2 times after plug-in ,then both off,red led on in charging, green led on after fully charge.end charge by negative delta V or peak voltage detection,red led flash in error status.
- Dimension:96.0X44.0X28.0mm