Product description

 

 

This kind of adhesive dispenser are mainly designing for locking the screw or screw shape products which can make you screw rust- protection or make you screw shape products more tight,such as Pneumatic components, connectors, screws, bolts, stud, screw, self-tapping screws, etc.

 

 

Product features

 

1. Liquid be will evenly dispensing inside the screw

2. Position place adjustment convenience

3. Dispensing end can as your require to adjustable

4. Speed is quickly, high efficiency and stability uniform coating

5. Quantitative high accuracy and long life

6. Easy to operate, Compact

7. Large supply device and saving time reloading.

8. Locks bolts, prevents tampering stops corrosion

9. Seals weld, seals threaded pipe, seals nicked threads

10. Digital circuit timing controlling technology was used, and the dispensing time ,motor speed, delay and advance time ,can be set through the digital dial.

 

 

Product specification

Standard: CE Approved                                                                                                                                                                         

Length: <120 mm

ID Size: M5-M30

Drive : Precision motor

Control way: Foot pedal

Motor speed: 10～200 Cycles/minute

Repeatability: ±0.01mm

Frequency: 2-5sec/pcs                                                                                
Input voltage: 1-7 bar (100 psi) maximum 

Output voltage:  0.1bar-7bar
Input voltage: 110 VAC or 220 VAC
Internal Voltage: 24 VDC                                                                                          Weight: <10Kg
SIZE 55 x 40 x 75(cm)

 

Applications

Pneumatic components, connectors, screws, bolts, stud, screw, self-tapping screws, etc.
Apply liquid material

Thread sealant, anaerobic adhesive, thread-locking adhesive, anti-loose plastic, etc.