Insulation Piercing Connectors Type: JMA400
Main:120-400mm2 Branch:95-240mm2
Features:
1)Simple installation, small contact resistance and low temperature rise of the clamp.
2)The applicable voltage is 10KV, 1KV or less than 1KV.
1)Simple installation, small contact resistance and low temperature rise of the clamp.
2)The applicable voltage is 10KV, 1KV or less than 1KV.
3)Piercing connector, simple installation, no need to strip the cable coat.
4) The piercing pressure of torque-control nut is constant, keeping good electric connection without any damage to lead.
5)Self-sealed structure, waterproof, fireproof, and corrosion-proof, extending the service life of insulated lead and connector.
6)Adopt special piercing blades, apply to joint of Cu(Al) and Cu(Al) or Cu and Al.
7)Small contact resistance, impulse current can be up to 15KA.
8)Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kV.
9)Reinforced thermo-plastic body design, apply to connection with the same (different) diameter cable , wide connection scope (0.75 mm2-400 mm2)
Main application:
Applicable to the connection of main circuitry and outdoor circuitry.
Applicable to T-connection of structural distribution power system,
the connection of aerial low voltage insulated cable, or indoor electric wire, distribution system of street lamps.
Can be installed on an energized conductor.
Can be installed on an energized conductor.
Specifications:
Cat.No. |
Main(mm2) |
Tap(mm2) |
Bolts No. |
JMAEP |
4-95 |
1.5-10 |
1 |
JMA2-95 |
16-95 |
4-35(50) |
1 |
JMA2-150 |
50-150 |
4-35(50) |
1 |
JMA3-95 |
25-95 |
25-95 |
1 |
JMA4-150 |
50-150 |
50-150 |
1 |
JMA185 |
50-185 |
50-150 |
2 |
JMA240 |
95-240 |
95-240 |
2 |
JMA400 |
120-400 |
95-240 |
2 |