These series of impactor crusher is designed for crushing ores and rocks with particle sizes less than 100-500mm and compression strength no more than 320MPa. The impactor crusher has features of big crushing ratio, high-efficiency crushing, cubic shape, selectable crushing, etc. It is widely used in highway, hydropower construction, airport and building industries

 

Working Principle of Impact Crusher

The impact crushes materials with impact force. When the materials enter the blow bar area, they are crushed due to the high-speed impact of the blow bar and are thrown to the impact plates on the rotor for secondary crush. Then the materials will be shot back to the blow bar again for the third crush. This process repeats until the materials are crushed to the required size and discharged from the lower part of the machine. The size and shape of the finished powder can be changed by adjusting the gap between the impact rack and rotor support. The machine employs self-weigh security device in its back frame. When other objects enter the impact cavity, they will be forced out of the machine by the impact rack in the front and back of the machine.

 

Characteristics of Impact Crusher

Crushing hard rock, connection with locking sleeve assembly, the blow bar with high chrome, hydraulic or hand opener switch, impact plate with special shape

 

Technical Parameters:

Model	Feed Opening(mm)	Max. Feed Size(mm)	Capacity (t/h)	Discharge Size(mm)	Motor Power (kw)	Weight (t)	Overall Dimensions (mm)
PF-1007	820×700	300	24-45	20-60	55	9.5	2400×1558×2660
PF-1010	1170×720	350	50-80	20-60	75	10	2532×1985×2196
PF-1210	1090×465	350	80-130	20-60	110	14	2638×2037×2713
PF-1214	1440×465	350	100-160	20-60	132	18	2580×2400×2810
PF-1315	1532×560	350	140-200	20-60	200	19.3	2840×2748×2556
PF-1316	1690×859	350	150-220	20-60	200	19.5	3096×2850×2667

Note: This specification is just for reference, any changes are subject to impact crushers.