Product Features

1)    Ease of use
Absolutely no programming or technical knowledge is required to use this system. Any computer can access its HTML web-based control panel using Internet Explorer, Mozilla Firefox, Google Chrome, etc. 

2)    Flexible User configuration
Configuration can be changed easily with any local computer. Only authorized with the correct user ID and password can access AplusWEB. 

3)    Standalone operation
AplusWEB need only to connect to the equipments to be monitored. No PC or server is required. The PC is needed only for configuring its operating parameters and for viewing the status of the equipments. Network ready. 

4)    Microcontroller based design
It is not a PC hardware and does not contain moving parts like hard disk, CD-ROM drive that can affect its reliability.

5)    Low power consumption
Because it does not consume much power, AplusWEB does not generate heat and will run for 24 hours without worries of breaking down. In the event of incoming power failure, it can operate for hours on a small capacity lead acid battery / power supply unit.

6)    Small 
The dimension is just 70(l) x 38(h) x 100 (d) mm and weight a mere 480 grams, it can be fitted into any chassis or equipment cabinet or be obscurely installed in any corner of the equipment room.

7)    Repeat SMS
If enabled, when an alarm is triggered, the SMS will be sent repeatedly to the operation and forward group repeatedly at the interval specified during software configuration. To cancel repeat sending, any mobile phone from the operation or forward must acknowledge to AplusWEB by replying the acknowledge command. Once AplusWEB received the acknowledgement command it will stop sending further SMS for this trigger.

8)    Automatic Health Check 
The " Auto Health Check" message allows user to check, via SMS or enable to auto check that the AplusWEB unit is functioning properly: If " enable" is checked, AplusWEB will send a SMS message on scheduled system date and time. If the auto health check is not enable, user still can perform manual health check by sending a SMS health check command.

9)    Remote Phone Management
Re-assigning of operation personnel, a change of mobile phone number is also common. Rather than having to physically go to the installation site with a notebook computer, the authorized personnel can perform the change from anywhere using their mobile phone. Where there are many installed sites, distance or time is a concern, this becomes very efficient.