◆ Specification
Cell name： Mono-crystalline solar cells
Cell size： 156mm x 78mm
No. of cells and connections：36 series (4 x 9)
Unit weight： 5kg
Module size： 770x665x35 (mm)
Produced in accordance with ISO, IEC, CE and TUV etc.
◆ Electrical Characteristics
Nominal peak power (Wp)： 60Wp
Nominal voltage (Vmp)： 17V
Nominal current (Imp)： 3.53A
Open circuit voltage (Voc)： 21V
Short circuit current (Isc)： 3.97A
Solar cell efficiency： 14.0%
Maximum system Voltage： 715V DC
◆ Physical Characteristics
Operating temperature： -40℃ to +85℃
Storage temperature： -40℃ to +85℃
Pressure bearing： ≥2400Pa
Wind bearing： ≥5400Pa
Hail impact test 225g steel ball drops from height of 1m
◆ Temperature Coefficients
Noct： 45℃ ±2℃
Temperature coefficient of ISC： +0.05%/℃
Temperature coefficient of VOC： +0.05%/℃
Temperature coefficient of PM： +0.05%/℃
Power output Tolerance： ±3%
◆ Product Description
SFM-60 solar module is connected in series by 36 pieces of 156mmx78(1/2)mm crystalline silicon cells. The product performance is produced according to ISO, IEC, CE and TUV etc. international standard. It can also be tailored to special requirements of customer.
◆ Features and Advantages
1. High luminousness low iron hardened glass;
2. Anti-ageing EVA and excellent anti-climate back sheet;
3. Anodized excellent aluminum alloy frame;
4. High conversion efficiency, long life, convenient installation, wind protection, hail-stone protection;
5. High quality product warranty for 25 years.
◆ Application
1. Power supply for remote telecommunication equipment;
2. Monitoring systems for the oil & gas industry;
3. Traffic, security, environment and other remote monitoring and signaling systems;
4. Water pumping systems;
5. Rural electrification;
6. Small home power systems;
7. 12V and 24V battery charging systems;
8. Other industrial and commercial applications
◆ Installation
1. Install the PV modules facing South (in Northern hemisphere), or North (in Southern hemisphere).
2. PV modules connected in series should be installed at same orientation and angle. Different orientation or angle may cause loss of power output due to difference of amount of sunlight exposed to the modules.