"Shunxing” brand 6MR-141 sized sawtooth linter is mainly used for peeling cottonseed of cotton ginning factories and oil milling factories. Its main function is to put cottonseeds after ginned into working case of linter, scrape and peel by rotate saw blade with obstructing by rib strips, to make cottonseed and short fluff divided. This new machine is developed adopting domestic and abroad advanced technique. Its specialties is: big processing volume, high short fluff quality, low consuming power, high automatic level and reliable operation and stabilization, which leads advanced position in domestic same kinds products and is the ideal products for renewing cotton processing and cotton peeling machines. Main technical targets: When third cottonseeds ginning, fluff rate of dischaged cottonseeds is 0.4-0.6%, when flufffrous rate≥12%, hydrated rate ≤12% a. General output volume of fluff per hour ≥0.15kg b. Power consuming per one hundred fluff≤60kw/h c. Reference processing volume of cottonseeds: First-step fluff: 1000-1400kg/ table hour Second-step fluff: 500-800kg/ table hour Third-step fluff: 450-600kg/ table hour Saw blade roller: diameter 320length1555.4mn Saw blade pieces: 141pieces Saw blade distance: 11.1mm Saw blade rotate speed: first-step 860round/min second and third step 880 round/min Brusher axis turning speed: 1400 round/ min Seeds-peeling roller rotate speed: first-step 480 round/min second and third step 710round/min Dust basket turning speed: 0.53 round/min Equipped power: saw axis 11kw, brusher 5.5kw Outer dimension(L*W*H): 2485*1300*1600mm Machine weight: 2000kg