Labor-saving wrench Series
58 Short Labor-saving wrench
58 Extended Labor-saving wrench
68 Short Labor-saving wrench
68 Extended Labor-saving wrench
78 Extended Labor-saving wrench
88 Gearing Labor-saving wrench
Transmission Torque 1:60 All the material for the 40Cr
Product Service object:
Trucks, heavy-duty trucks, various types of military vehicles, container trucks, tankers, buses, mine car, dump truck, tractor. Also applies to factories and enterprises, and other special vehicles and large equipment.
Introduction
"Long Li" brand truck tire nut wrench disassembly effort, specifically specializing in various heavy-duty tires disassembly, technical characteristics of their products are as follows:
1. For the new generation of products. In the original basis of similar products, made in a number of technical improvements. Planetary gear systems mainly use large modulus, short tooth structure, so gear shaft thicker, tooth more strong, too bold a Shaft，which is generation significantly increased compared with the carrying capacity of the structure, greatly reduces the chance of bad products, is the carrying capacity of similar products in the largest.
2. With three planetary gear combination of ratio 4:1 per class, 3 total ratio 64:1, and output torque is to input torque of 64 times, when you shake the rocker green time, effort wrench has output powerful torque, complete nut disassembly. No electricity, no compressed air, just gently shake your joystick.
3. The parts of the machine are with high strength alloy steel, which makes the small size and light weight. Appearance of light and beautiful, feel light, easy to carry, easy to operate ,so it is the best choice for your Truck tool.
4. The maximum output torque up to 3500 Nm ，which is bigger than air impact wrench. It can be with ease. that many nuts can not be removable,
5. However, this would also remind you that any force must be enough is enough, is true of this product. When you feel there are obvious rocker when the rebound, they do not need to force, and then, your force may have more than 25 kilograms, the output of the output shaft torque wrench may have exceeded the 3500 Nm .In this way, most likely damage the tires on the nuts or bolts. So remind, not too much force, not brute force, rocker on the force can not more than 25 kg!
6. The product is supporting the market generic 1-inch sleeve of air guns, air guns sleeve Scope: Margins 22mm to 41mm.