Configuration and application
1. TYA series products are used for take-out operations at the final product side and runner side of horizontal injection molding machines ranging from 50T to 300T.
2. Single-load model is TYS-550/650, double-load model is TYA-750/850. Three-plate molds can be used together to nip the final product and runner.
3. Transverse drive: pneumatically driven or driven by frequency-converting motor (AC servo motor optional for driving).
4. Manipulator can be used to increase production capacity, lower non-conforming rate and precisely control the output.
5. Operator safety is ensured and labor and costs are reduced.
Structure and functions
1. Transverse axis is driven by shank-free cylinder or frequency-converting motor (or use AC servo motor for driving). The upper/lower axis and crosswise axis are driven by the cylinder.
2. Imported high-rigidity aluminum-alloy beam and linear slide rail are employed for transverse move and upper/lower arm. Together with the application of high-rigidity bearing steel, the requirements of high-speed take-out, high efficiency, high precision and long service time can be met.
3. Specially designed belt multi-speed mechanism is employed for the double-load arm, which can shorten the structural height between upper and lower arms. For the upper and lower cylinders, the full-stroke effects can be realized with the move of only half stroke. This design is particularly suitable for low-height plants.
4. Side beveling mechanism can be used with dynamic or fixed mold for take-out operation and provide a fixed beveling angle of 90 degrees.
5. Pneumatic pipeline and inspection signal are pre-set for the clamp, with two return circuits, for both sucking and holding. This structure can be used for such take-out operations of the clamp as sucking, nipping and holding, as well as for the taktake-out of various final products.