NXP LPC1768 ARM Cortex-M3 Evaluation Board

Features:
-Powerful MCU core: Cortex-M3
-processing rates of up to 100MHz, and includes a support eight areas of memory protection unit (MPU)
-Built-nested vector interrupt controller (NVIC)
-512KB on-chip Flash program memory, to support in-system programming (ISP) and In-Application Programming (IAP)
-64KB SRAM for high-performance CPU through the instruction bus, system bus, data bus access
-AHB multi-layer matrix with 8-channel DMA controller, general-purpose (GPDMA)
-Support the SSP, UART, AD / DA, timer, GPIO, etc., and can be used for the transmission of memory to memory
-Standard JTAG test / debug interface and debug serial line and serial line tracking port option
-Simulation trace module supports real-time tracking
-4 low-power modes: sleep, deep sleep, power-down, deep power-down
-Single 3.3V power supply (2.4V - 3.6V)
-Operating temperature: -40 ° C - 85 ° C
-Non-maskable interrupt (NMI) input
-On-chip integrated power-on reset circuit
-Built-in systems beat the timer (SysTick), to facilitate the operating system migration.

Board Resources
1,2-Way RS232 serial interface (using the straight-through serial cable, serial port support them all the way ISP download)
2,2 Road CAN bus communication interface (CAN Transceiver: SN65VHD230)
3, RS485 communication interface (485 Transceivers: SP3485)
4, RJ45-10/100M Ethernet network interface (Ethernet PHY: DP83848)
5, DA output interface (USB sound card can do experiments on-board speaker and speaker output driver)
6, AD input interface (adjustable potentiometer input)
7, color LCD display interface (which can take 2.8-inch or 3.2-inch color TFT 320X240)
8, USB2.0 Interface, USB host and USB Device Interface.
9, SD / MMC card (SPI) interface (available with FAT12, FAT16, FAT32 file system)
10, IIC Interface (24LC02)
11, SPI Serial FLASH Interface (AT45DB161D)
12,2 user keys, 2 function keys and the INT0 Reset button, 8 LED lights
13,1 Five keys to enter the joystick (Joystick)
14, serial ISP download (no need to set jumpers), the standard JTAG download, simulation debugging interface.
15, integrated USB emulator: simulation and debug capabilities to support online and support KEIL, IAR and other mainstream development environment.
16, optional external 5V power supply or USB input to provide 5V power supply.
17, leads all the IO, user-friendly external circuit to the secondary development of other applications.

Package List:
1X NXP LPC1768 Development Board
1X 3.2'' Inch color touch module
1X USB copper cable
1X Serial download cable
1X Crossover cable
1X 5V Power Adapter
1X CD

Introduce for 3.2" TFT LCD Module

8-bit or 16-bit parallel bus interface,8-bit mode use 74HC573 latch low 8-bit (short R7 enable 8-bit mode), open R7 is 16-bit mode (default), use high 8-bit operation bus in 8-bit mode low 8-bit float, Support a ATMEL DataFlash AT45DBxxx series device, Can directly use AVR,PIC,C51,ARM.STM32 MCU driver

General Introduce
Resolution:  QVGA 262K 240*RGB*320
Size: 3.2"
Controller: IL9320
Touch Panel: 4-wire
Pin Pitch: 37Pins & 1mm
2.7-3.3V operating voltage
Backlight: 5 LEDs Parallel
RSM1843 touch panel controller onboard  directly compatible with ADS7843
Standard 2.54mm PCB headers for prototyping
Support a SD card interface
 
3.2" TFT LCD Module Interface Instruction
Pin-Function
1-3V3
2-GND
3-DB00
4-DB01
5-DB02
6-DB03
7-DB04
8-DB05
9-DB06
10-DB07
11-DB08
12-DB09
13-DB10
14-DB11
15-DB12
16-DB13
17-DB14
18-DB15
19-CS
20-RS
21-WR
22-RD
23-RESET
24-EN back_light enable
25-MISO
26-TP_INT
27-MOSI
28 LE
29-SCLK
30-F_CS
31-TP_CS
32-SD_CS

Payment
PayPal/WesternUnion/BankTransfer

Shipping
EMS(Default)/UPS/DHL/FedEx