Feature:

        1.These designs come with two access valves on each side to provide most effective protection for compressor

           Filtrate precision: 35 microns

        2.Appropriate temperature: -45℃_+65℃

        3.Maximum pressure: 4.70Mpa/680PSIG

Specification:

Feature:

        1.  Preventing dirt from entering compressor

         2.If jammed inside the filter, the spilling valve will be opened automatically

         3. Applying to various alloy welding

          4.Excellent corrosive resistance ability

          5.Pressure reduced automatically when full liquid flowing through

          6.Full size of products series

When the refrigerant Liquid flows along the direction of the arrow instructed on the filter, the side spilling-valve will run its function: If it generates exceeding pressure decline when flowing over parts, the side valve will be slightly opened to remain sufficient airflow to cold down the temperature of motor inside the hermetical compressor.

The side valve will be not workable when the suction filter drier is installed direction conversely with the arrow instructed on the filter, whatever pressure decline is, it won’t be opened automatically. At this moment, it needs to be installed one access valve to test pressure decline through from filter core to air-absorption assist valve of compressor.

Letter of “T” shows there is an access valve inside this type of equipment, if the side valve can not run its function, please use this access valve to test pressure.

Specification: