Desoldering pump:

Power: 30W

Voltage: 220V

 

Characteristic: Tip with extra strong corrosion resistance!

With Perfect appearance, novel structure and easy to use

Instruction Manual:

1. Plug the power cord into a power source, allow the nozzle to warm up for approx. 3-5 min.

2. when solder melts, press the control button, the solder will be absorbed into the pump.

3. For welding, the operation is the same as using soldering iron.

4. Desoldering pump with two different diameters' nozzle which can be selected according to the thickness of the original lead.

 

Notes

1. Check the compatibility of the used voltage, high or low voltage is not conducive to use

2. Before using, pay attention to tighten the pump to prevent leakage, or it will impact the absorbing effect.

3. Often remove the solder pump impurities, and add a little of oil .

4. After each using, to promote the Pistons 3-4 times to remove solder waste inside the straw, so that flow within the nozzle and straw for the next use.