Features

 

●          Printed by 1+1 rhythm lead

●          Automatic measurement and analysis of common ECG parameters.

●         Digital isolation technology is for minimizing component drift v/s time& temperature to guarantee high-adaptability of the equipment to the environment.

●         Digital signal processor for effective inhibition of baseline drift, AC interference filter, EMG interference filter and the heart rate, to guarantee the authenticity and dependability.

●         With function of rhythm lead for observing abnormal ECG waveform & heart rate, Automatic Measurement and Interpretation of ECG waveform to relieve doctors from strain.

●         Roll recording paper for digital ECG is 63mm in width, can simultaneously show 12 lead waveforms and print out three real time lead waveforms.

●         Built-in RS232 interface, USB interface is optional.

●         Concept of floating input circuit meets IEC safety standard.

●         Supported by AC/Rechargeable battery for continuous examination whenever necessary. For battery operation, ECG is equipped with a battery charger and a system for battery capacity management and protection.

 

Specification

 

Lead: Standard 12 Leads

Acquisition Mode: Simultaneously 12 leads acquisition

Record Mode: manual mode, auto mode1, auto mode2, auto mode3

Filter: AC filter; EMG filter

CMRR: >100dB (with filter)

Input Circuit: floating input circuit, with protection circuit against defibrillation

Input loop Current: ≤0.1μA       

Input Impedance: ≥2.5MΩ

Patient Current Leakage: ＜10μA      

Calibrating Voltage: 1mV±2％   

Skin Voltage Tolerance: ±500mV

Time Constant: ≥3.2s

Frequency Response: 0.05～150Hz(-3dB)    

Noise Level: ＜15μVp-p

Sensitivity Threshold: ≤20μV     

Inter-channel Interference: ≤0.5mm    

Paper Speed: 25、50mm/s（±3％）

Sensitivity: AUTO，2.5，5，10，20mm/mV        

Recording System: Thermal-array System

Recording Paper Specifications: 63mmx30mm，Roll Paper

LCD: 192×64 LCD, Display waveform, Chinese and English menu and working status

Safety Standard: GB9706.1-1995, IEC class I, type CF

Power Supply: AC: 220V / 110V, 50/60Hz, 30VA

DC: 14.4V (2000mAh) rechargeable battery

Fuse Specification: AC time lag: T500mA/125V (110V) ;

T400mA /250V (220v);     

                                  DC time lag: T2A/250V; (110-230V);